Mahindra 35 Series User Manual

H-3
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
1. SPECIFICATION
a) Steering Control Unit
1. Make ---------------------------------------------------------- EATON
2. Type ----------------------------------------------------------- Open center non load reaction
3. Displacement ----------------------------------------------- 6.10 inch
3
/ rev (100 cc/rev)
4. Relief valve setting --------------------------------------- 100 Bar
5. Rated flow -------------------------------------------------- 19 lpm
b) Pump
1. Make ---------------------------------------------------------- EATON
2. Type ----------------------------------------------------------- Gear
3. Displacement ----------------------------------------------- 8 cc / rev
c) Cylinder
1. Type ----------------------------------------------------------- Double acting balanced
2. Bore ----------------------------------------------------------- ø 63 mm (2.48 in.)
3. Rod ------------------------------------------------------------ ø 38 mm (1.50 in.)
4. Stroke --------------------------------------------------------- 220 mm (8.66 in.)
d) Filteration --------------------------------------------------------- Strainer 100 mesh and suction line filter
10 micron common with hitch circuit
e) Maximum Operating Temperature ------------------------ 90
o
C
Steering

Mahindra 35 Series Specifications

General

Cylinders	3
Transmission	8 Forward + 2 Reverse
Fuel Type	Diesel
Brake Type	Oil Immersed
Brakes	Oil Immersed
Steering	Power Steering
Drive Type	2WD
Engine Type	Diesel
Steering Type	Power
Fuel Tank Capacity	45 liters