C-9
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
Introduction
Description Torque (Lbs-Ft)
Crankshaft Assembly
Crankshaft To Crankcase Main Bearing Cap Bolt 1/2"-13 UNC 90 to 95
Piston Assembly
Connecting Rod Assembly Bolt 3/8"-24 UNF3A 40 to 45
R.O.S.R. Fitment
Crankshaft Rear Oil Seal Retainer Bolt 5/16" UNC x 25 18 to 22
Idler Shaft Fitment
Idler Gear Shaft Bolt 1/2" UNF X 1-7/8 Hex Head 65 to 75
Camshaft Assembly
Camshaft Thrust Plate Bolt 3/8"-16 UNC 20 to 25
Fitment Of Rotary FIP
Injection Pump To Adapter Stud M8x1.25x38 10 to 12
Injection Pump To Adapter Plate Mounting Flanged Nut M8x1.25 18 to 22
FIP Add. Plate To Front Plate Bolt 15 to 18
FIP Hexagonal Nut 55 to 65
FIP Support Bracket Flanged Nut M8x1.25 18 to 22
FIP Support Bracket Flanged Bolt G7.938mm X 19.05mm 18 to 22
Fitment Of Front Cover
Front cover To Crankcase Mounting Bolt G 7.938x50.8 mm Hx Hd 18 to 22
Front Cover To Crankcase Mounting Bolt G7.938x63.5 Hx Hd-v 18 to 22
Alternator Mounting Bracket on Front Cover To Crankcase Bolt G7.938x63.5 18 to 22
Alternator To Alternator Mounting Bracket on Front Cover (M8x1.25x85mm) 18 to 22
Alternator To Brace Bracket bolt M10x1.5x25mm 20 to 25
Alternator With Bracket M10x1.5x85mm 35 to 37
Timing Mark Pointer On Front Cover 4 to 6
IPG Cover Bolt 12 to 16
Fan Drive Pulley To Crankshaft Mounting Bolt 120 to 140
Water Pump Mounting Nut 3/8'’ UNC 25 to 30
Alternator Brace Bracket To Cylinder Head (M8x30 mm) 18 to 22
Alternator Brace Bracket To Alternator with Belt Guard Nut (M10) 18 to 22
Heat Shield Nut With Alternator Mounting Bolt
Heat Shield Bolt Nut M10x1.5 25 to 30
Tube Thermostat Bypass 8 to 10
Oil Sump & Adapter Plate Fitment
Lubricating Oil Pump To Crankcase 3/8" UNC X 1-1/8 25 to 30
TORQUE LOADING (TIGHTENING TORQUE) CHART
To Next Page
Loading...
Need help?
General
