87
35 Series-HST, Model - 3535, 4035, 4535 & 5035
Specifications
MAHINDRA – 4035 HST
DIMENSIONS
Length overall : 123.8 in.
Width overall : 73.7 in.
Height overall upto ROPS : 98.7 in.
Wheel base : 70.87 in.
TREAD ADJUSTMENT
Front ( Industrial ) : 52.9 in. to 56 in.
Rear ( Industrial ) : 56.3 in. to 59.8 in.
Front ( Ag ) : 53.6 in. to 55.2 in.
Rear ( Ag ) : 52.1 in. to 60.1 in.
OPERATING WEIGHT (APPROX.)
Basic tractor including fuel, oil coolant, hydraulic system,
3 point linkage, transmission, P.T.O., lighting and
standard wheel sizes.
WEIGHT DISTRIBUTION *
(when measured without optional weights fitted)
Front weight : 1804 lbs.
Rear weight : 2563 lbs.
Total weight : 4367 lbs.
TIRES
Front ( Industrial ) : 12 x 16.5, 6 Ply
Rear ( Industrial ) : 16.9 x 24, 8 Ply
Front ( Ag ) : 9.5 x 16, 6 Ply
Rear ( Ag ) : 14.9 x 24, 6 Ply
TURNING RADIUS (MINIMUM)
With brakes : 116 in.
Without brakes : 136 in.
Note : Roll over protection structure is standard fitment on all tractors.
Note : Specifications and design subject to change without notice.
Dimensions are in inch and based on Industrial 12 x 16.5 front tires and 16.9 x 24 rear tires.
* Manufacturer's estimate under standard condition and subject to change without prior notice.
73.7
Note :- One US gallon = 4 quarts.
70.87
123.8
98.7
TIRE 16.9 x 24 Industrial
Gear Forward Reverse
Low 3.2 3.2
Medium 8.0 8.0
High 15.5 15.5
CAPACITIES US Gallons Quarts
Fuel Tank 11.36 45.44
Cooling System 1.85 7.4
Engine Oil 1.58 6.32
Transmission 10.03 40.12
Front Axle 2.24 8.96
SPEEDS :
Speed chart in mph.
TIRE 14.9 x 24 Ag
Gear Forward Reverse
Low 3.52 3.52
Medium 7.75 7.75
High 16.86 16.86
To Next Page
Loading...
Need help?
General