A-14
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
CHECK AND MAINTENANCE
Be sure to check and service the tractor on a flat
and clean place with engine shut off, parking brake
on and blocked wheels.
(1) Daily check
To prevent trouble from occurring, it is
important to know the condition of the
tractor, check the following items.
CHECKING
• Checking areas where previous trouble was
experienced.
• Walk around the tractor.
1. Check the tire pressure and check for wear
and damage.
2. Check for oil and water leakage.
3. Check the engine oil level.
4. Check Transmission fluid level.
5. Check coolant level.
6. Check and clean the radiator screen and grill.
7. Check the condition of ROPS attaching
hardware.
8. Check the bolts & Nuts of the wheels.
9. Condition of danger, warning and caution
labels.
10. Clean around the exhaust manifold and the
muffler of the engine.
11. Check fan belt tension.
• While sitting in the operator’s seat
1. Check the working condition of the throttle
pedal, brake pedals and clutch pedal.
2. Check the parking brake.
3. Check the steering wheel play.
General
• After Turning the switch Key
1. Check the Headlights, taillights and hazard
lights clean it necessary.
2. Check the performance the meters and
gauges.
• After Starting the engine
1. Check the colour of the Smoke.
2. Check the brakes for proper operation.
CHECK POINTS
Wheel Mounting nuts checking
• Never operate tractor with untightened rim
wheel.
• Check all bolts and nuts frequently and keep
them tight.
Checking Radiator hoses and clamps.
- If hose clamps are loosen or water leaks,
tighten clamps securely.
- If radiator hoses are swollen, hardened or
cracked replace hoses and clamps.
- Check all power steering line, fuel line, clamps
and hoses.
- If these found damage, replace them.
Sr. Application Capacity Anticipated minimum air temperature
No. Gallon / Litres –40 to +88
0
F –22 to +88
0
F –4 to +122
0
F +32 to +104
0
F +50 to +122
0
F
1. Crankcase 3 Cyl. 1.58 / 6.34 SAE 15W40 SAE 15W40 SAE 15W40 SAE 15W40 SAE 15W40
4 Cyl. 2 / 8.03
2. Transmission & 9.2 / 36.8 SAE 75W UTTO SAE 80W UTTO listed above.
Hydraulics
3. Lubrication Fittings C. L. NLGI No. as recommended
4. Front Axle - 3535 1.71 / 6.84 SAE75W90EP SAE80W140EP SAE80W90EP SAE80W140EP
4035, 4535 & 5035 2.24 / 8.98 SAE80W90EP listed above for ambient temperature range - 4
0
F to 104
0
F
Oil Specifications Chart
To Next Page
Loading...
Need help?
General