Remember to mount the new hoe blade in exactly the same position as the old one (Fig. 20).
If several hoe blades must be replaced, it is advisable to remove and assemble one hoe blade at a time in order to
prevent positioning errors.
24
The heads of the bolts fixing the hoe blades in place must be on the side of the hoe blades themselves, while
the nut with relative washer must be on the flange side (Fig. 20).
Apply the tightening torques as listed in the Chart on page 22.
If the hoe blades must be changed, remember to set the new blades in the same positions as the demounted ones
(Fig. 20).
3.10 GEARSHIFT
Machine are equipped with a gearshift (Fig. 21), with one pair of gears.
A variety of rotation speeds of the rotor can be obtained so that the needs of the operator can be better met.
It is very useful for land which is uneven in that it makes rotary hoeing easy and at the same time allows the tractor to
be maintained at a constant speed.
Invert the gears or change their positions to change speed.
3.0 USE INSTRUCTIONS
Fig. 20
Fig. 21
To Next Page
Loading...