© Copyright Mahindra & Mahindra Ltd. 042015
13-13
• Detach the bulb assembly from the wiring connector near to the head lamp
• Insert the connector into the new bulb (of the same wattage), and follow the
reverse procedure to assemble the bulb assembly in the headlight assembly
• Clamp the bulb assembly by wire clamp properly
Do not touch the new bulb with your fingers. Oil contamination will severely
shorten bulb life. If the bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
MAINTENANCE
To Next Page
Loading...
Need help?
General
