© Copyright Mahindra and Mahindra Ltd. 062016
2-7
• Cautiously pry out the wheel cover using both hands as shown
• Remove the securing nuts on the spare wheel
• Remove the spare wheel
Always loosen the wheel nuts before raising the vehicle. Turn the
wheel nuts counter clockwise to loosen. To get maximum leverage,
fit the spanner to the nut so that the handle is on the left side. Grab
the spanner near the end of the handle and push down on the
handle. Be careful that the spanner does not slip off the nut. Do not
remove the nuts, but loosen them by one or two turns.
GENERAL
To Next Page
Loading...
