EasyManua.ls Logo

Mahlkonig K30 ES User Manual

Mahlkonig K30 ES
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GASTRONOMIEMÜHLEN
|
HORECA GRINDER
The professional art of grinding
since 1924
Operating Instructions
K30 Single Espresso Grinder
Grind-on-Demand“
K30 ES
K30 Vario
NEW SOFTWARE:
Easy time change &
barista mode
see chapter 6.3
Question and Answer IconNeed help?

Do you have a question about the Mahlkonig K30 ES and is the answer not in the manual?

Mahlkonig K30 ES Specifications

General IconGeneral
BrandMahlkonig
ModelK30 ES
CategoryCoffee Grinder
LanguageEnglish

Summary

1. Safety

1.1 Symbols

Describes warning symbols used in the manual.

1.2 Safety Instructions

Details critical safety precautions for operation and user conduct.

2. Technical Data

1.3 Usage Purpose

Describes the intended use of the grinder.

1.4 Personnel Requirements

Outlines necessary user qualifications and understanding of instructions.

3. Description

Components and Operating Elements

Lists and illustrates the main parts of the grinder.

4. Safety Devices of the Grinder

Thermal Overload Circuit Breaker

Explains the motor's thermal protection.

Motor Protector

Describes the thermal switch protecting the motor windings.

Micro-switch at the Grinder's Lid

Details the safety switch linked to the lid.

5. Set-Up and Basic Adjustment

5.1 Usage Location

Specifies where to place the grinder for optimal operation.

5.2 Mounting the Hopper

Provides step-by-step instructions for attaching the hopper.

5.3 Electrical Installation

Guides on connecting the grinder to the power supply.

5.4 Adjustment of the Port-a-filter Rest

Explains how to adjust the rest for different portafilters.

6. Operation

6.1 Handling the Grinder

Outlines the basic steps for operating the grinder.

6.2 Grind Adjustment (Grinding Fineness)

Details how to adjust the coarseness of the grind.

6.3 Adjustment of Grinding Time

Describes how to set the grinding time for single/double shots.

6.4 Software Menu

Introduces software functions, covering time adjustment, shot counters, and cleaning/disc reminders.

7. Operating Faults

Troubleshooting Common Issues

Lists defects, causes, and remedies for common grinder problems.

8. Cleaning

8.1 Cleaning with GRINDZ™ Grinder Cleaner

Provides instructions for cleaning with a specific cleaner.

8.2 Cleaning the Grinder Placement Surface

Details how to clean the area where the grinder sits.

8.3 Cleaning the Grinder Casing

Explains how to clean the exterior of the grinder.

8.4 Cleaning of the Hopper

Describes daily cleaning procedures for the hopper.

9. Service

General Service Precautions

Lists safety measures before performing maintenance.

9.1 Exchange of the Built-in Grinder EK11

Step-by-step guide for replacing the grinder unit.

9.2 Grinding Disc Exchange

9.3 Recalibration of the Grind Adjustment

10. Spare Parts

Ordering Spare Parts

Information required for ordering replacement parts.

11. Wiring Diagram

100-115V 50/60Hz Diagram

Presents the electrical wiring diagram for 100-115V.

200-230V/240V Diagrams

Presents electrical wiring diagrams for 200-230V and 240V.

12. Certificate

EC Declaration of Conformity

Displays the manufacturer's declaration of compliance with EU directives.

13. Warranty Conditions

Warranty Terms and Limitations

Outlines the warranty period, coverage, and exclusions.

Related product manuals