Name: Maico MC250
Brand: Maico
Rating: 5 (1 reviews)

To Next Page

To Previous Page

8. FENDERS

The front fender is rubber-mounted on the lower triple clamp. The rear fender is also rubber-mounted

under the seat and on the rear frame member. Both fenders are made from vibration resistant fiberglass.

9. FRONT WHEEL

The rim is available in either chromed steel or

aluminium alloy. The measurements are 1.60 x

21 ". The tire is 3.00 x 21" - mota cross with a

rim lock to keep the tire from spinning on the

rim. The front hub (drum brake) is made of cast

aluminium alloy. with a cast-in steel brake drum

ring. The brake diameter is

1360mm 18 spokes M 4 x 243 mm

18 spokes M 4 x 230 mm

On the small end of the hub is a reinforcing ring

made of aluminium alloy for strength.

13. F rant Wheel

10. REAR WHEEL

This rim is also available in chromed steel. size

1.85 x 18". or aluminium alloy. size 2.15 x 18".

The tire is either a 4.00 or 4.50 x 18" - mota

cross type with one rim lock to secure the tire

to the rim. The rear hub is steel made with a

cast-in brake drum, 160 mm diameter with a large

recession for heavy duty bearings especially for

mota cross. The brake shoes are forged of mag-

nesium with epoxied brake linings.

18 spokes M 4 x 143 mm

18 spokes M 4 x 208 mm

The rear brake is operated with the right foot by

a forged aluminium alloy foot lever connected

with a steel brake rod.

14. Rear Wheel