EasyManua.ls Logo

Major 8400 - Noise Hazard and Operating Safely

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
www.major-equipment.com
Operating Safely
The MAJOR Rollermower is designed to operate at 540 RPM. Ensure tractor PTO output is set at 540 RPM. The
MAJOR Rollermower must only be used for cutting grass. Moreover, it must only be used with a suitable tractor (see
product speci cations) and driven by an adequate drive-line by the tractor PTO. All other use is strictly prohibited.
Users should become thoroughly familiar with the contents of this manual before using, servicing and mounting the
implement to the tractor and all other pertinent operations. Never wear jewellery, loose clothing such as ties, scarves,
belts, unbuttoned jackets or dungarees with open zips which could become caught up in moving parts.
Always wear approved garments complying with accident prevention provisions such as non-slip shoes, ear muffs,
goggles and gauntlets. Wear a jacket with re ecting stickers if the implement is used near public highways.
Consult your retailer, the Labour Health Service or your nearest equivalent authority for the information about the cur-
rent safety provisions and speci c regulations with in order to ensure personal safety.
ALWAYS DISENGAGE PTO, SWITCH OFF THE TRACTOR ENGINE AND ENGAGE THE PARKING BRAKE BE-
FORE MAKING ADJUSTMENT TO THE MACHINE.
Noise Hazard
Please note that the machine is normally used outdoors and that the position of the operator is seated in the driving
seat of the tractor. It is advisable to consult the prescriptions listed in tractor operator and maintenance manuals.
The acoustic pressure was measured at a distance of 2.6m from the centre of the machine and at a height of 2.0m,
with the implement operating in a no load condition - 90 dBA. In a loaded condition & a PTO rate of 540 rpm the
obtained value was 97dBA.

Related product manuals