4
www.major-equipment.com
Safe Storage of the Machine
• Make sure the unit is sitting fi rm and solid and will not tip over
• Brace angle adjustment ram (tilt Ram)
• Rest weight and post cap on a post driven into the ground when storing for long periods
Operating the Machine
Inspections before Use
• Grease every 20 hours of operation and pre/post season
• Ensure tractor is of suffi cient weight to be stable with Post Driver
• Ensure that the Post Driver is properly attached to the tractors three point linkage
• Check that all hydraulic fi ttings are tight
• Check rope is in good condition & replace with correct type when wear is detected.
• Check that guarding is present & not damaged.
• Check for damaged, worn, missing parts and replace if necessary
• Check safety labels are in place on beam and hammer and that they are clean and legible. Replace if necessary
Main Key
Main Key - Guarding removed for clarity
Key to Main Parts
To Next Page
