MAJORITY SCH-DVD-BLK - DVD Operation; Supported Media Formats; Basic Playback Steps

9
DVD Operation
Instrucons Guide
Once your DVD player has been connected to the TV and to a
power source, the product is ready for use.
The following DVD formats can be played: DVD, DVD-R-RW, CD
Video, Mpeg4, DivX.
Please complete the following guidance to complete the set up
of the DVD player:
1. Ensure that your TV is set to the correct mode for DVD
playback.
2. Plug in the DVD player and press the ‘Power’ button to turn
the unit on. You can do this on the unit (Ref.) or via the remote
(Rem.1).
When the machine is switched on, pressing the POWER button
on the remote control will make it go into standby mode. Press
the button again and the machine will switch on.
WARNING: If the product is not going to be used for a long
period of time, it is advisable to unplug it for safety
3. Press the Open/Close button on the front panel (Ref.) or on
the remote control (Rem.20) and place a DVD disc on the disc
tray. Press the Open/Close button again to close the tray.
4. The DVD will read the DVD disc and begin play. You can
control the playback and settings via the buttons of the remote
control.