Make Noise TEMPI - Machine Programming: Phase (contd); Fine Phase Adjustment

16
[HOLD]
Buttons(s)1-6
+
For Fine Phase decrement, hold the
associated Channel Button(s)1-6 and
press PGM_A. The State LED
ashes red to indicate a Fine Phase
decrement has been made.
For Fine Phase increment, hold the
associated Channel Button(s)1-6 and
press PGM_B. The State LED
ashes green to indicate a Fine Phase
increment has been made.
For Fine Phase adjustment:
[press] PGM_A to
Fine Phase decrement
(i.e. lead ahead of Leading TEMPO)
or
[press] PGM_B to
Fine Phase increment
(i.e. lag behind Leading Tempo)
While still on the Phase Programming Page:
Machine Programming: Phase (cont’d)
For Channels Programmed to be Divisions, Fine Phase adjustments oset the Phase of a Channel’s Output
by one quarter of a cycle of the Leading Tempo. Likewise, for Channels Programmed to be Multiples, it
osets the Phase of the Leading Tempo.
Coarse Phase adjustments override Fine Phase adjustments. In this way, Coarse Phase adjustments return to
integral divisors and multipliers, for instance, 1:1.