Need help?Do you have a question about the MAKELSAN PowerPack SE 1 kVA and is the answer not in the manual?
General safety guidelines for operating the UPS system.
Safety precautions related to UPS battery handling and replacement.
Steps to check the UPS and its accessories after unpacking.
Identifies rear panel components and connection types for various voltage outputs.
Key considerations and precautions before and during UPS installation.
Procedure for installing 1-10KVA UPS models and connecting output.
Installation and connection for 6-10KVA UPS models with isolation transformers.
Details on various output wiring configurations for different voltage needs.
Guide for setting up a parallel UPS system for 6-20KVA models.
Steps for connecting external battery packs for extended backup runtime.
Details on connecting UPS to computers via RS232 and USB ports for management.
Functionality and wiring of the Emergency Power Off (EPO) port.
Procedure for installing intelligent cards (SNMP, dry contact, USB) for monitoring.
Explanation of the functions for each button on the UPS control panel.
Description of the meaning and status of the UPS's LED indicators.
Explanation of the information displayed on the UPS's LCD screen.
Step-by-step guide for powering the UPS on and off in different modes.
How to perform self-test and mute test functions on the UPS.
How to enable or disable the ECO (Energy Saving) mode.
Configuration for activating the UPS bypass output.
Procedure to set the desired output voltage.
Setting the low voltage cutoff for battery protection.
Enabling and configuring the frequency converter mode.
Setting the output frequency when CUCF mode is active.
Configuring the IP address for network communication.
How to check input, output, battery, load, and temperature parameters.
Explanation of the UPS's bypass mode and its LED indications.
Details on the UPS operating in Line mode with input AC power.
Explanation of UPS operation when relying on battery power.
Information about the ECO mode for energy saving.
How the UPS operates and indicates faults.
A comprehensive list of fault codes and their meanings.
A detailed guide to diagnose and resolve common UPS issues.
Explanation of symbols used in the manual and on the UPS.
Technical specifications for 1-3KVA UPS models.
Technical specifications for 6-10KVA UPS models.
Physical size and weight details for 220V UPS models.
Physical size and weight details for 120V UPS models.
Details of the product warranty, coverage, and duration.
Exclusions and conditions not covered under the product warranty.
General| Capacity | 1 kVA |
|---|---|
| Power Rating | 800 W |
| Frequency | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Input Voltage | 220 VAC / 230 VAC / 240 VAC |
| Output Voltage | 220 VAC / 230 VAC / 240 VAC |
| Transfer Time | ≤10 ms |
| Communication Interface | USB/RS232 |
| Humidity | 0% to 95% non-condensing |
| Battery Type | Sealed Lead-Acid (SLA) |
| Battery Backup Time | 5-10 minutes (depending on load) |
To Next Page