Need help?Do you have a question about the MAKELSAN PowerPack SE 10 kVA 1/1 and is the answer not in the manual?
Essential safety guidelines for operating the UPS system properly.
Precautions for safe handling and replacement of UPS batteries.
Key considerations and warnings before installing the UPS.
Guidelines and procedures for setting up UPS units in a parallel configuration.
Instructions for configuring various UPS settings via the front panel.
A comprehensive table listing fault codes and their corresponding issues.
A guide to diagnosing and resolving typical UPS operational problems.
Detailed explanation of the product's warranty period and coverage.
General| Power Rating | 10 kVA |
|---|---|
| Input Voltage | 220/230/240 VAC |
| Output Voltage | 220/230/240 VAC |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Efficiency | > 90% |
| Waveform | Pure Sine Wave |
| Communication Interface | RS232, USB, SNMP (optional) |
| Operating Temperature | 0°C to 40°C |
| Phase | 1/1 |
| Battery Type | Sealed Lead Acid |
| Transfer Time | 0 ms |
| Storage Temperature | -15°C to 50°C |
| Humidity | 0% to 95% non-condensing |
To Next Page