Need help?Do you have a question about the MAKELSAN LEVELUPS Series and is the answer not in the manual?
General| Series | LEVELUPS |
|---|---|
| Topology | Line Interactive |
| Input Voltage | 220-240VAC |
| Input Frequency | 50/60Hz (Auto Sensing) |
| Output Voltage | 220-240VAC |
| Waveform | Simulated Sinewave |
| Battery Type | Sealed Lead Acid Maintenance Free |
| Communication Interface | USB (optional) |
| Protection Features | Overload, Short Circuit, Over Voltage, Under Voltage, Battery Over Charge/Discharge |
Critical safety instructions and warnings for installation and operation.
Requirements for installation area and operator access.
Guidelines for proper storage and transportation of the UPS.
General view of the UPS unit with key dimensions.
Identification of controls and displays on the front panel.
Identification of connections and components on the rear panel.
Diagram illustrating the UPS electrical connections.
Explanation of the UPS electrical topology and operation.
Description of UPS operating states: Online, Battery, Bypass, etc.
Details on battery charging, testing, and critical battery safety.
Explanation of the front panel display, menus, and navigation.
How to navigate through menus and view screen information.
Details on password-protected menus and control menu functions.
Information available in the status menu regarding UPS parameters.
Available settings for date, time, and other configurations.
Accessing event logs and the service menu for diagnostics.
Step-by-step guide for installing a single UPS unit.
How to configure internal and external battery systems.
Moving UPS cabinets and making mains, load, and battery connections.
Proper cabling, fuse selection, and connection steps for power.
Procedures for connecting internal and external batteries.
Connecting serial and expansion communication interfaces.
Guidelines and procedures for setting up multiple UPS units in parallel.
General steps for operating the UPS.
Explanation of the function of each circuit breaker and controls.
Guide for powering up the UPS for the first time.
How to test different UPS operational modes.
Procedures for safely shutting down the UPS and using the EPO function.
Installing and using the RS232 communication interface.
Meanings of recorded UPS events and warnings for troubleshooting.
Detailed performance and electrical specifications of the UPS.
Headquarter and branch contact details for support and inquiries.
To Next Page
