MAKER MADE M2 - Parts N E E de D

Tools needed for building and operating your M2
(that didn’t come with your kit):
Router
13mm Combo Wrench (or any adjustable wrench)
Phillips Screwdriver/ drill
Tape Measure/Digital Caliper
Two Standard Sized Bricks (to that attach to the M2 for weight during
operation)
Dust Collection System
Drew’s Note: Check out the M2 Video Playlist for an overview of what’s in the box
and other how-to videos!
You’ll have to supply your own router for your M2. Here is the recommended list:
Router Clamp Size MakerMade
Tested
Community
Tested
Bosch Colt 1hp
(PR20EVSK)
71mm (included with M2) Yes Yes
Bosch 2.25hp
(1617EVS)
91mm (included in M2
Upgrade Kit)
Yes Yes
DeWalt 611 1.25hp
(DWP611)
71mm (included with M2) Recommended Yes
DeWalt 618 2.25
(DW618M)
91mm (included in M2
Upgrade Kit)
Yes Yes
Makita 1.25hp
(RT0701C)
71mm (with 3D printed
adapter)
Yes Yes
Ridgid 2hp
(R2202)
91mm (included in M2
Upgrade Kit)
Yes Yes
Ridgid 2hp
(R22002)
91mm (included in M2
Upgrade Kit)
Yes Yes
The following is what came in your M2 Upgrade kit!
PARTS NEEDED
4