Need help?Do you have a question about the Makita 2414DB and is the answer not in the manual?
Read manual for applications, limitations, and potential hazards.
Ensure safety guards are fitted and functional before operation.
Develop habit of removing tools before powering on.
Do not use in damp/wet locations or near flammable materials.
Avoid loose clothing; wear non-slip footwear and hair covering.
Protect eyes from impact and dust; use face/dust mask if needed.
Ensure the switch is in the OFF position before plugging in.
Ensure supply voltage matches tool's nameplate rating.
Use fiberglass-reinforced wheels with speed rating >= tool's RPM.
Replace cracked or damaged wheels immediately.
Never operate without guards; check guard function before use.
Ensure hands are clear of the wheel and moving components.
If wheel stops or vibrates unusually, switch off immediately.
Detailed steps for safely changing the cut-off wheel.
Properly use the vise to clamp the workpiece for cutting.
Proper handle pressure and technique for efficient cutting.
To Next Page
General
