Model 2702 2703
2702x1 2703x1
Blade diameter .......................................... 210 mm 255 mm
Hole (arbor) diameter ................................ 25 mm 25 mm
Cutting capacities ...................................... 90°: 68 mm 91 mm
45°: 47 mm 63 mm
Table size (W x L) ..................................... 686 mm x 560 mm 686 mm x 560 mm
No load speed (RPM) ............................... 4,600 4,600
Dimensions (L x W x H) ............................ 560 mm x 686 mm x 458 mm 560 mm x 686 mm x 458 mm
Net weight ................................................. 18 kg 18 kg
Due to the continuing program of research and development, the specifications herein are subject to change without
prior notice.
Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,
therefore, also be used from sockets without earth wire.
Table Saw
210 mm 2702
2702x1
255mm 2703
2703x1
SPECIFICATIONS
To Next Page
Need help?
General
