T
ECHNICAL INFORMATION
Specifications
Standard equipment
1. Parallel ruler ( for parallel/standard size treating)...1pc
2. Sliding bevel (for bevel treating)...1pc
3. Cap (for jigsaw/router/blade mouth plate)...1pc
4. Pressing board/L (for attaching jigsaw/router/trimmer)...1pc
5. Pressing board/S (for attaching 3600/3601B)...1pc
6. Wrench 10-13 ( for adjusting Parallel ruler)...1pc
7. Wrench 19 (for attaching Saw)...1pc
8. Wrench 22 (for attaching Saw)...1pc
9. Countersunk head screw M6x50...1pc
New Tool
CONCEPTION AND MAIN APPLICATIONS
In the former easy type of Circular stand, there are some problems to
be improvedsuch as the steadiness or the structure for attaching
Portable circular saw. Also, we thought Switch, Inclination/Up-and-
down of Saw, and Operativity could be improved. Now we have
improved all those points to meet the demand from overseas for a new
product which is easily carried and less expensive.
Motor Series commutator motor
100V
14A
50/60Hz
4500rpm
1350W
61mm
Diameter of Saw attached to Machine (for export) 210mm
45mm
W660mm x D460mm x H 375mm
17kgs
5m
300mm( both right/left sides of Table)
660mm (When attaching Extension holder in special accessories:1200mm)
460mm (When attaching Extension holder in special accessories:730mm)
275mm ( When attaching Circular saw machine stand in specialaccesories :825mm)
Voltage
Current
Frequency
Consuming power
Rotation
Blade size
Capacity
Max. incision depth 90
Max. incision depth 45
Max. cutting width with Parallel ruler
Table
Outer size
Weight
Power supply cord
Width
Depth
Height
Optional accesories
1. Circular saw machine stand( exclusively for Circular saw machine) 1set
2. Holder (w/clamp and screws, for extension table) 1set
3. Grooving cutter Width: 2.4~15mm
Flat washer 15 ( used for substitute for Plane/Flange)
Outer flange 30, (Thickness: 13mm, in case of cutter width 9mm or less)
4. Saw blade
Various saw blades are available; Saw diameter Ø168 ~Ø210
2708
203mm(8") Table saw
Models No.
Description
To Next Page
Need help?
General
