Need help?Do you have a question about the Makita 3901 and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| No Load Speed | 30, 000 RPM |
| Input Power | 720W |
| Net Weight | 4.4 lbs |
| Overall Length | 10.5 inches |
| Collet Capacity | 1/4 inch |
Explains symbols for manual, double insulation, and EU waste disposal.
Covers tool's purpose, power supply, noise, vibration, and EU compliance.
Covers 22 essential safety points for tool usage, from work area to maintenance and repair.
Provides 18 additional safety rules, including blade handling, workpiece securing, and tool operation.
Details on adjusting cutting depth with stopper/screw and setting the angle guide height.
Instructions for adjusting the fence angle between 0° and 90° using lock lever and scale.
Guidance on using the set plate for thin workpieces and operating the slide switch.
Step-by-step instructions for removing and installing the cutter or saw blade.
How to attach, use, and empty the dust bag for dust collection.
Steps for fitting workpieces, marking slot centers, and notes on slot placement.
Guidance on how to clamp workpieces for different joint types like Miter or Frame.
Aligning, switching on, and pushing the tool forward to cut slots in workpieces.
Instructions for specific joints like Corner, T-Butt, and methods for non-centered blades.
Replacing the blade and removing rubber facing for trimming wall or ceiling panels.
Setting depth, resting base, and feeding the tool to trim wall or ceiling panels safely.
Instructions for checking, replacing, and maintaining carbon brushes.
Lists recommended accessories and attachments for the Makita tool.
To Next Page
