2
ENGLISH
Explanation of general view
1. Air Tank pressure gauge
2. Regulated pressure gauge “HP”
3. Air regulator “HP”
4. Quick coupler “HP” (Air outlet)
5. Regulated Pressure gauge “RP”
6. Air regulator “RP”
7. Quick coupler “RP” (Air outlet)
8. Drain valve
9. Pressure Switch
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
IMPORTANT
Read the Safety Guidelines and ALL instructions carefully before operating.
1
2
3
4
5
6
7
8
9
Model AC310H
MAX Input Power 1800 W
SCFM @ 40 PSIG (L/min @ 2.8 bar) 3.7 (106 L)
SCFM @ 90 PSIG (L/min @ 6.2 bar) 3.6 (101 L)
SCFM @ 300 PSIG (L/min @ 21 bar) 2.7 (77 L)
Cut-In Pressure 2.3 MPa (23 bar)
Cut-Out Pressure 2.8 MPa (28 bar)
Bore x Stroke x Qty 62 mm x 31 mm x 1.45 mm x 10 mm x 1
Voltage -Single Phase 220 - 240 V AC
Hz 50 Hz
Motor RPM 1420 min
-1
Lubrication Oil-Less
Tank Size 1.6 gal (6.2 L)
Weight 36 kg (79.4 lb)
Dimensions (L x H x W) 18-3/4” x 14-3/4” x 20" (476 x 375 x 507 mm)
Outlet Max Pressure “HP“
(Exclusively for High Pressure Pneumatic Use)
2.6 MPa (26 bar)
Outlet Max Pressure “RP“
(Exclusively for Regular Pressure Pneumatic Use)
0.9 MPa (9 bar)
Noise L
WA 90 dB
To Next Page
Loading...
