Makita DCE090 User Manual

State of abnormality Probable cause (malfunction) Remedy
Cutting tool and motor cannot stop:
Removethebatterycartridge
immediately!
Electric or electronic malfunction. Removethebatterycartridgeandaskyourlocal
authorized service center for repair.
Poor cutting performance It is time to replace the wheel. Replace the wheel with new one.
Water leaks from the inlet. Water is leaking from the O-ring part. Askyourlocalauthorizedservicecenterforrepair.
OPTIONAL ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
Ifyouneedanyassistanceformoredetailsregard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Abrasivecut-o󰀨wheel
• Diamond wheel
• V-belt
• Coupling sleeve
• Flange60set(countryspecic)
• Box wrench
• Hex wrench
• Makitagenuinebatteryandcharger
NOTE:Someitemsinthelistmaybeincludedinthe
toolpackageasstandardaccessories.Theymay
di󰀨erfromcountrytocountry.
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
www.makita.com
885786A928
EN
20200514

Makita DCE090 Specifications

General

Brand	Makita
Model	DCE090
Category	Cutter
Language	English