To Next PageTo Next PageWhy does my Makita DCL501Z Vacuum Cleaner have weak suction power?
Weak suction power in your Makita Vacuum Cleaner can stem from a few causes. First, check if the dust cup is full and empty it if necessary. Also, a clogged filter could be the culprit; try dusting it down or washing it. Lastly, ensure the battery isn't exhausted by recharging it.
General| Quantity per pack | 1 pc(s) |
|---|
Basic safety precautions for operating electrical appliances, covering handling, environment, and misuse.
Specific warnings to reduce risks of fire, electric shock, and injury during use.
Rules for reading manuals, avoiding hazardous materials, and proper operation.
Precautions for battery installation, charging, storage, and preventing short circuits.
Guidance on charging cycles, temperature, and storage to optimize battery lifespan.
Step-by-step instructions for safely attaching and detaching the battery cartridge.
How to turn the cleaner on, off, and adjust between high and low speed settings.
Explanation of indicator lamps for filter status (orange) and battery charge (red).
Procedure for loosening dust from the filter using the cleaning lever after each use.
Instructions on how to empty the dust cup when it reaches the 'Dust Full' line.
Table of common symptoms like weak suction or non-operation and their respective fixing methods.
Information on recommended accessories and precautions regarding their safe and intended use.
Details on the one-year limited warranty, including policy, exclusions, and customer rights.
