Makita DES 350 - User Manual

Questions and Answers

J
joshua97Aug 10, 2025
What to do if my Makita DES 350 has no oil on the saw chain?
- B
  brucemartinezAug 10, 2025
  If there is no oil on the chain of your Makita Chainsaw, the oil tank may be empty, or the oil guide groove may be dirty. Check the oil tank and refill if necessary, and clean the oil guide groove.
L
lancesilvaAug 15, 2025
What to do if my Makita DES 350 has no chain lubrication?
- J
  Justin BrownAug 15, 2025
  If your Makita Chainsaw chain isn't getting lubrication, the oil tank might be empty, or the oil guide groove could be dirty. Check the oil tank and refill it. Also, clean the oil guide groove.
A
Alexander RobinsonAug 20, 2025
Why Makita DES 350 Chainsaw chain does not start?
- D
  Dr. Destiny FreemanAug 20, 2025
  If the chain on your Makita Chainsaw doesn't start, the chain brake may be engaged. Disengage the chain brake.
J
Julia WardAug 26, 2025
Why is my Makita Chainsaw electric motor not functioning?
- M
  Mrs. Tracey Gross MDAug 26, 2025
  If the electric motor of your Makita Chainsaw isn't working, it could be due to a lack of power supply or a defective cable. Check the power supply and replace the cable if it is defective.
R
richarddurhamAug 29, 2025
What to do if my Makita Chainsaw is very warm and the electric motor is not running?
- T
  tamara90Aug 29, 2025
  If your Makita Chainsaw gets very warm and the electric motor isn't running, the overload protection may have been activated (DES 380 models only). Reset the overload protection.
C
Cheyenne GriffithSep 4, 2025
How to fix low pulling power in my Makita DES 350 Chainsaw?
- K
  Kyle GilbertSep 4, 2025
  If your Makita Chainsaw has low pulling power, the carbon brushes might be worn. Replace the carbon brushes.