4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DF330D
Drilling capacities Steel 10 mm
Wood 21 mm
Fastening capacities Wood screw 5.1 mm x 63 mm
Machine screw M6
No load speed High (2) 0 - 1,300 min
-1
Low (1) 0 - 350 min
-1
Chuck capacity 0.8 mm - 10 mm
Overall length 189 mm
Rated voltage D.C. 10.8 V
Net weight 1.0 kg
without notice.
Applicable battery cartridge and charger
Battery cartridge
Charger
residence.
WARNING: Only use the battery cartridge(s) and charger(s) listed above.-
Intended use
wood, metal and plastic.
Noise
-
Sound pressure level (L
NOTE:
another.
NOTE:
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
Vibration
-
h,D
2
or less
2
NOTE:
measured in accordance with a standard test method
NOTE:
To Next Page
Loading...
Need help?
General
