To Next PageTo Next PageWhat to do if lamps don't light up on my Makita DRC200Z Vacuum Cleaner?
If the lamps on your Makita Vacuum Cleaner do not light up when you press the button, install the battery cartridges correctly, fully charge them, and then press the button to turn the cleaner ON.
How to fix Makita DRC200Z Vacuum Cleaner when lamp flashes 4 times?
If the lamp on your Makita Vacuum Cleaner flashes 4 times for each sequence, remove the threads and hairs from the drive wheels.
What to do if Makita Vacuum Cleaner lamps flash once?
If the lamps flash once for each sequence on your Makita Vacuum Cleaner, install the dust box or the filter.
What to do if all lamps flash once on my Makita Vacuum Cleaner?
If all lamps flash once for each sequence on your Makita Vacuum Cleaner, fully charge the battery cartridges.
Why is my Makita DRC200Z Vacuum Cleaner operating louder than usual?
If your Makita Vacuum Cleaner is making louder noises than usual, you should empty the dust box and clean the filter, the side brushes, and the main brush.
How to fix a Makita Vacuum Cleaner that falls down stairs?
If your Makita Robotic Cleaner falls down stairs, clean the cliff sensors.
Why is my Makita Vacuum Cleaner hitting obstacles more frequently?
If your Makita Robotic Cleaner is hitting obstacles more frequently, try cleaning the ultrasonic sensors.
What to do if my Makita Vacuum Cleaner does not travel straight forward?
To resolve the issue of your Makita Vacuum Cleaner not traveling straight forward, turn it OFF, and then remove any foreign objects tangled in the drive wheels. Also, clean the ultrasonic sensors.
Why does my Makita Vacuum Cleaner start automatically?
The auto-on timer has been activated on your Makita Robotic Cleaner.
Why is the cruising speed not constant on my Makita Vacuum Cleaner?
If the cruising speed of your Makita Robotic Cleaner is not constant, it is because when an obstacle is detected, the Robotic Cleaner will slow down as it takes time to calculate a traveling direction. This is not a malfunction.
General| Brand | Makita |
|---|---|
| Model | DRC200Z |
| Category | Vacuum Cleaner |
| Language | English |
System cuts power to motor when overloaded to extend cleaner and battery life.
Overheating causes a lamp to flash and the cleaner to stop automatically.
Low battery levels cause the cleaner to stop and not respond to switches.
Details the buttons and indicators on the Robotic Cleaner itself.
Measures to prevent the robotic cleaner from falling down stairs or ledges.
