To Next Page
A
Ashley VelasquezSep 4, 2025
Why does my Makita DRC300PG2 start moving suddenly?
- LlaurenlawrenceSep 4, 2025
The ON timer reservation might be enabled, causing the robotic cleaner to start moving suddenly.
Why does my Makita DRC300PG2 start moving suddenly?
The ON timer reservation might be enabled, causing the robotic cleaner to start moving suddenly.
Why does my Makita DRC300PG2 Vacuum Cleaner remote not work?
If the remote control for your Makita Vacuum Cleaner isn't working, first check that the batteries are correctly placed. If the cleaner sometimes doesn't respond, replace the batteries with new ones. Ensure the cleaner's power is on by pressing the start/stop button. Also, make sure the distance between the remote and cleaner isn't too far, and there are no obstructions.
Why does the side brush keep coming off my Makita Vacuum Cleaner?
If a side brush keeps coming off your Makita Vacuum Cleaner, ensure it is installed correctly.
How to troubleshoot a Makita Vacuum Cleaner that won't turn on?
If pressing the start/stop button on your Makita Vacuum Cleaner doesn't turn on the power, and the lamp doesn't light up, first check if the batteries are installed correctly. If they are, check the remaining battery capacity. Also, ensure that the power of the robotic cleaner is turned on by pressing the start/stop button on the cleaner itself.
Why does my Makita DRC300PG2 Vacuum Cleaner emit a bad smell?
If your Makita Vacuum Cleaner is emitting a bad smell, it might be because: * Wet or smelly garbage was sucked in. Discard the garbage. * The filter is clogged. Clean the filter and ensure it is completely dry before reuse.
Why does the time reset on my Makita DRC300PG2?
If the set time on your Makita Vacuum Cleaner is frequently reset, the built-in battery may be low from not being used for a long time. Run the cleaner for more than 1 hour, or leave it in standby to recharge the battery.
Why does my Makita Vacuum Cleaner stop when running?
Your Makita Vacuum Cleaner might stop running due to several reasons: * The robotic cleaner may be caught in a cord or other object, or a cloth or string may be entangled around the wheels. Turn off the power and remove any obstructions. * The robotic cleaner may have stopped without climbing over a step. Turn off the power and relocate the robotic cleaner. * The OFF timer might be set up. * Obstacles with a height of 25 cm or more around the robotic cleaner may be detected by the LiDAR sensor. Place some obstacles taller than 25 cm in the area.
Why does the sound of the vacuum fan on my Makita Vacuum Cleaner become louder during operation?
This is normal. The sound of the vacuum fan on your Makita Vacuum Cleaner becomes louder when the robotic cleaner switches the battery cartridge to use.
What to do if my Makita DRC300PG2 Vacuum Cleaner exhausts air that smells?
If the exhausted air from your Makita Vacuum Cleaner smells, it could be due to wet or smelly garbage being sucked in. Discard the garbage. Also, the filter might be clogged, so clean the filter. If you wash the filter with water, make sure to dry it sufficiently before using it again.
Why does my Makita Vacuum Cleaner not run?
If your Makita Vacuum Cleaner is not running, it could be due to the following reasons: * The error lamp might be blinking. The cleaner will not run during an error. * The cleaner might be in the waiting mode for operation by ON timer reservation. Operations other than turning off the power and location notification are not possible in this mode.
General| Model | DRC300PG2 |
|---|---|
| Category | Vacuum Cleaner |
| Type | Cordless |
| Power Source | Battery |
| Battery Type | Lithium-ion |
| Battery Voltage | 18V |
| Dust Collection Method | Bagless |
| Hose Length | 2.5 m |
| Filter Type | HEPA |
