Makita DRC300PG2 User Manual (English)

Questions and Answers:

S
Susan NguyenAug 27, 2025
What to do if my Makita DRC300PG2 Vacuum Cleaner stops while running?
- C
  christopherchurchAug 27, 2025
  If your Makita Vacuum Cleaner stops while running, it may be caught on a cord or other object, or a cloth or string might be tangled around the wheels. Turn off the power and remove any obstructions. If it stopped without climbing a step, turn it off and move it to another location. Also, the LiDAR sensor requires obstacles taller than 25 cm within certain ranges, so ensure such obstacles are present.
R
Rebecca GriffinAug 27, 2025
Why is the brush on my Makita Vacuum Cleaner not rotating?
- J
  John ColeAug 27, 2025
  If a side or main brush on your Makita Vacuum Cleaner isn't rotating, is hard to rotate, or is tangled, check for foreign matter like lint or hair. Clean the brushes and ensure they, along with the main brush cover, are properly installed.
R
Robert TerryAug 27, 2025
Why does my Makita DRC300PG2 smell?
- M
  Monica IngramAug 27, 2025
  If the exhausted air from your Makita Vacuum Cleaner smells, it may have sucked in wet or smelly garbage. Discard the garbage. Also, the filter might be clogged, so clean it, and if you wash it with water, ensure it's completely dry before using it again.
D
david72Aug 27, 2025
What to do if my Makita DRC300PG2 does not run?
- T
  Tim MurrayAug 27, 2025
  Your Makita Vacuum Cleaner might not run if the error lamp is blinking. Also, if the cleaner is in the waiting mode for operation by ON timer reservation, operations other than turning off the power and location notification are not possible.
J
Jared MartinezAug 28, 2025
Why does my Makita Vacuum Cleaner not run?
- D
  Donald MendozaAug 28, 2025
  If your Makita Vacuum Cleaner is not running, it could be due to the following reasons: * The error lamp might be blinking. The cleaner will not run during an error. * The cleaner might be in the waiting mode for operation by ON timer reservation. Operations other than turning off the power and location notification are not possible in this mode.
J
Janet MitchellAug 28, 2025
Why won't my Makita DRC300PG2 Vacuum Cleaner turn on when I press the start button?
- I
  ilongAug 28, 2025
  If your Makita Vacuum Cleaner doesn't turn on when you press the start/stop button, there could be several reasons. First, ensure the batteries are installed correctly. Second, check the remaining battery capacity to see if they are depleted. Finally, verify that the power of the robotic cleaner is turned on by pressing the start/stop button.
J
Justin LewisAug 29, 2025
Why is the suction power weak on my Makita Vacuum Cleaner, and it's not picking up dust?
- S
  Sarah WilsonAug 29, 2025
  If your Makita Vacuum Cleaner has weak suction or isn't picking up dust, the dust box might be full, or the filter could be clogged. Dispose of the dust and clean the filter. Also, check if the vacuum fan is turned off and adjust the setting accordingly.
C
Christina YatesAug 29, 2025
What to do if the remote control for my Makita Vacuum Cleaner is not working?
- R
  Robert RamirezAug 29, 2025
  If the remote control for your Makita Vacuum Cleaner isn't working, first check the battery orientation. Replace the batteries with new ones if they are old. Ensure the robotic cleaner is powered on. Also, make sure there is a clear path between the remote control and the cleaner by reducing the distance and removing obstacles.
H
Heather NewmanAug 25, 2025
Why won't my Makita DRC300PG2 turn on?
- J
  Jennifer WilsonAug 25, 2025
  If pressing the start/stop button on your Makita Vacuum Cleaner doesn't turn it on, and the lamp isn't lighting up, first ensure the batteries are installed correctly. Also, check if the battery capacity is sufficient. If the power is off, press the start/stop button to turn the cleaner on.
M
Miss Lisa MccoyAug 30, 2025
What should I do if a side brush or main brush on my Makita Vacuum Cleaner won't rotate or is tangled?
- W
  Willie FreemanAug 30, 2025
  If a side brush or main brush on your Makita Vacuum Cleaner doesn't rotate, is hard to rotate, or is tangled, foreign matter like lint or hair might be caught in the brushes. Clean the brushes and check for proper installation of the main brush and the main brush cover.

Makita DRC300PG2 Specifications

General

Model	DRC300PG2
Category	Vacuum Cleaner
Type	Cordless
Power Source	Battery
Battery Type	Lithium-ion
Battery Voltage	18V
Dust Collection Method	Bagless
Hose Length	2.5 m
Filter Type	HEPA