Makita DSD180 User Manual

10 ENGLISH
Attaching blade cap
CAUTION: Always attach the blade cap when
tool is not used. A bare blade may cause personal
injuryordamagetothebladeitself.
Pass the blade cap through the blade until the hook
catches the base cover. Note the direction of the blade cap
when attaching; the wider hook comes front side. When
removing the blade cap, lift it while pinching the both sides.
1
2
►1. Blade cap 2. Hook
During operation, insert the blade cap to the hook on
the base as illustrated until it clicks.
1
2
►1. Blade cap 2. Hook
Hex wrench storage
When not in use, store the hex wrench as shown in the
guretokeepitfrombeinglost.
1
►1. Hex wrench
Connecting a vacuum cleaner
CAUTION: Attach the blade cap before con-
necting vacuum cleaner.
Connect a Makita vacuum cleaner for clean operation.
Remove the rubber cap on the dust collector and con-
nect the vacuum cleaner's hose to the nozzle of the
dust collector.
1
3
2
►1. Dust collector 2. Rubber cap 3. Vacuum cleaner
hose
OPERATION
CAUTION: Hold the tool rmly.
CAUTION: Always hold the base ush with
the workpiece during cutting. Never perform a
curved cut. Failure to do so may cause blade break-
age,resultinginaseriousinjury.
The V-notch and convexed portion in the base cover of
the tool indicate the position of the blade. Always check
the blade position when cutting.
The base cover of the tool
2
3
1
►1. V-notch 2. Convexed portion 3. Blade

Makita DSD180 Specifications

General

Brand	Makita
Model	DSD180
Category	Saw
Language	English