Do you have a question about the Makita DTD171T1J and is the answer not in the manual?
Type | Impact Driver |
---|---|
Voltage | 18 V |
Max Torque | 180 Nm |
No Load Speed | 0 - 3, 400 rpm |
Impact Rate (Hi) | 0 - 3, 600 ipm |
Impact Rate (Med) | 0 - 2, 600 ipm |
Chuck Type | 1/4" Hex |
Weight | 1.5 kg |
Battery Type | Li-ion |
No Load Speed (Med) | 0 - 2, 600 rpm |
Driving Shank | 1/4" Hex |
Machine Screw | M4 - M8 |
Coarse thread screw (length) | 22 - 125 mm |