Why does my Makita Chainsaw not start?
Your Makita Chainsaw might not start because the battery cartridge isn't installed properly. Make sure to install the charged battery cartridge. Alternatively, the battery might be low. Try recharging it, and if that doesn't work, replace the battery cartridge.
What to do if there is no oil on the chain of my Makita DUC122PT4J?
If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it up if needed. Also, the oil guide groove might be dirty, so try cleaning it.
Why is my Makita DUC122PT4J not reaching maximum RPM?
Your Makita Chainsaw might not reach maximum RPM because the battery cartridge is installed improperly. Ensure it's correctly installed as described in the manual. Also, a low battery charge level could be the cause. Recharge the battery, and if that doesn't work, replace it.
Why does my Makita DUC122PT4J Chainsaw motor stop running after a little use?
If the motor of your Makita Chainsaw stops running after a short time, it could be due to a low battery. Try recharging the battery cartridge. If recharging doesn't help, replace the battery cartridge.
What to do if my Makita Chainsaw has abnormal vibration?
If your Makita Chainsaw is vibrating abnormally, stop the machine immediately and check if the guide bar or saw chain is loose. If they are, adjust the guide bar and saw chain tension.
General| Battery Voltage | 12 V |
|---|---|
| Battery Type | Lithium-ion |
| Automatic Chain Oiler | Yes |
| Tool-less Chain Tensioning | Yes |
| Battery Included | Yes |
| Charger Included | Yes |
| Power Source | Battery |
| Type | Cordless |
| Chain Speed | 5 m/s |
| Chain Gauge | 0.043" |
To Next Page
