EasyManua.ls Logo

Makita DUC121 - User Manual

Makita DUC121
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DUC121
DUC122
EN
Cordless Chain Saw INSTRUCTION MANUAL 7
UK
Бездротова ланцюгова
пила
ІНСТРУКЦІЯ З
ЕКСПЛУАТАЦІЇ
17
PL
Akumulatorowa Pilarka
Łańcuchowa
INSTRUKCJA OBSŁUGI 28
RO
Ferăstrău cu lanţ cu
acumulator
MANUAL DE INSTRUCŢIUNI 39
DE
Akku-Kettensäge BEDIENUNGSANLEITUNG 50
HU
Akkumulátoros láncfűrész HASZNÁLATI KÉZIKÖNYV 61
SK
Ručná reťazová píla NÁVOD NA OBSLUHU 72
CS
Akumulátorová řetězová pila NÁVOD K OBSLUZE 82

Table of Contents

Questions and Answers

  • E
    Edward WallerAug 8, 2025
    Why does my Makita DUC121 not start?
    • C
      Chris GrantAug 8, 2025
      Your Makita Chainsaw might not start because the battery cartridge isn't installed properly. Make sure to install the charged battery cartridge. Alternatively, the battery might be low. Try recharging it, and if that doesn't work, replace the battery cartridge.
  • A
    Andrew BookerAug 13, 2025
    What to do if there is no oil on the chain of my Makita Chainsaw?
    • C
      Christopher BonillaAug 13, 2025
      If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it up if needed. Also, the oil guide groove might be dirty, so try cleaning it.
  • D
    Douglas HartAug 16, 2025
    Why is my Makita Chainsaw not reaching maximum RPM?
    • A
      Angela FischerAug 16, 2025
      Your Makita Chainsaw might not reach maximum RPM because the battery cartridge is installed improperly. Ensure it's correctly installed as described in the manual. Also, a low battery charge level could be the cause. Recharge the battery, and if that doesn't work, replace it.
  • M
    michaelnobleAug 21, 2025
    What to do if my Makita DUC121 has no oil on the chain?
    • B
      brownlisaAug 21, 2025
      If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it if needed. If the tank isn't empty, the oil guide groove might be dirty; try cleaning it.
  • J
    Julia LeonAug 25, 2025
    Why does my Makita DUC121 Chainsaw motor stop running after a little use?
    • D
      Daniel Bell MDAug 26, 2025
      If the motor of your Makita Chainsaw stops running after a short time, it could be due to a low battery. Try recharging the battery cartridge. If recharging doesn't help, replace the battery cartridge.
  • T
    Tabitha MatthewsAug 29, 2025
    What to do if my Makita DUC121 has abnormal vibration?
    • E
      Elizabeth DrakeAug 29, 2025
      If your Makita Chainsaw is vibrating abnormally, stop the machine immediately and check if the guide bar or saw chain is loose. If they are, adjust the guide bar and saw chain tension.
  • M
    Melissa YoderSep 3, 2025
    What to do if my Makita DUC121 motor stops running after a little use?
    • M
      Marc BushSep 3, 2025
      If the motor of your Makita Chainsaw stops running after a short period, the battery's charge level might be low. Recharge the battery cartridge, and if that doesn't solve the issue, replace the battery cartridge.

Makita DUC121 Specifications

General IconGeneral
Battery Voltage12V
Voltage12V
Chain Gauge0.043 inches
Bar Length4 inches
Chain Speed3.5 m/s
Weight1.6 kg
Chain Pitch3/8 "
Oil Tank Capacity55 mL

Related product manuals