Why does my Makita Chainsaw not start?
Your Makita Chainsaw might not start because the battery cartridge isn't installed properly. Make sure to install the charged battery cartridge. Alternatively, the battery might be low. Try recharging it, and if that doesn't work, replace the battery cartridge.
What to do if there is no oil on the chain of my Makita Chainsaw?
If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it up if needed. Also, the oil guide groove might be dirty, so try cleaning it.
Why is my Makita Chainsaw not reaching maximum RPM?
Your Makita Chainsaw might not reach maximum RPM because the battery cartridge is installed improperly. Ensure it's correctly installed as described in the manual. Also, a low battery charge level could be the cause. Recharge the battery, and if that doesn't work, replace it.
What to do if my Makita Chainsaw has no oil on the chain?
If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it if needed. If the tank isn't empty, the oil guide groove might be dirty; try cleaning it.
Why won't my Makita Cordless Saw start?
Your Makita Cordless Saw might not start because the battery cartridge isn't installed correctly. Make sure to install the charged battery cartridge. Another reason could be a battery problem, such as undervoltage. Try recharging the battery cartridge; if that doesn't work, replace it.
What to do if Makita Cordless Saw motor stops quickly after starting?
If the motor of your Makita Cordless Saw stops running after a short period, it's likely that the battery's charge level is low. Recharge the battery cartridge. If recharging isn't effective, you may need to replace the battery cartridge.
How to fix Makita Cordless Saw that does not reach maximum RPM?
If your Makita Cordless Saw isn't reaching its maximum RPM, ensure the battery cartridge is installed correctly as described in this manual. A low battery charge could also be the issue, so recharge the battery cartridge, and replace it if necessary.
Why does my Makita DUC122PTE Chainsaw motor stop running after a little use?
If the motor of your Makita Chainsaw stops running after a short time, it could be due to a low battery. Try recharging the battery cartridge. If recharging doesn't help, replace the battery cartridge.
What to do if my Makita Chainsaw has abnormal vibration?
If your Makita Chainsaw is vibrating abnormally, stop the machine immediately and check if the guide bar or saw chain is loose. If they are, adjust the guide bar and saw chain tension.
What to do if my Makita DUC122PTE motor stops running after a little use?
If the motor of your Makita Chainsaw stops running after a short period, the battery's charge level might be low. Recharge the battery cartridge, and if that doesn't solve the issue, replace the battery cartridge.
General| Power Source | Battery |
|---|---|
| Battery Voltage | 12 V |
| Voltage | 12 V |
| Battery Type | Lithium-ion |
| Chain Gauge | 1.1 mm |
| Automatic Oiler | Yes |
| Tool-less Chain Tensioning | Yes |
| Type | Cordless |
| Bar Length | 11.5 cm |
| Chain Speed | 5 m/sec |
| Chain Pitch | 3/8 " |
To Next Page
