Why does my Makita DUC122 Chainsaw not start?
Your Makita Chainsaw might not start because the battery cartridge isn't installed properly. Make sure to install the charged battery cartridge. Alternatively, the battery might be low. Try recharging it, and if that doesn't work, replace the battery cartridge.
What to do if there is no oil on the chain of my Makita Chainsaw?
If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it up if needed. Also, the oil guide groove might be dirty, so try cleaning it.
Why is my Makita DUC122 Chainsaw not reaching maximum RPM?
Your Makita Chainsaw might not reach maximum RPM because the battery cartridge is installed improperly. Ensure it's correctly installed as described in the manual. Also, a low battery charge level could be the cause. Recharge the battery, and if that doesn't work, replace it.
What to do if my Makita DUC122 Chainsaw has no oil on the chain?
If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it if needed. If the tank isn't empty, the oil guide groove might be dirty; try cleaning it.
Why won't my Makita Cordless Saw start?
Your Makita Cordless Saw might not start because the battery cartridge isn't installed correctly. Make sure to install the charged battery cartridge. Another reason could be a battery problem, such as undervoltage. Try recharging the battery cartridge; if that doesn't work, replace it.
What to do if Makita Cordless Saw motor stops quickly after starting?
If the motor of your Makita Cordless Saw stops running after a short period, it's likely that the battery's charge level is low. Recharge the battery cartridge. If recharging isn't effective, you may need to replace the battery cartridge.
How to fix Makita Cordless Saw that does not reach maximum RPM?
If your Makita Cordless Saw isn't reaching its maximum RPM, ensure the battery cartridge is installed correctly as described in this manual. A low battery charge could also be the issue, so recharge the battery cartridge, and replace it if necessary.
Why does my Makita DUC122 Chainsaw motor stop running after a little use?
If the motor of your Makita Chainsaw stops running after a short time, it could be due to a low battery. Try recharging the battery cartridge. If recharging doesn't help, replace the battery cartridge.
What to do if my Makita Chainsaw has abnormal vibration?
If your Makita Chainsaw is vibrating abnormally, stop the machine immediately and check if the guide bar or saw chain is loose. If they are, adjust the guide bar and saw chain tension.
What to do if my Makita DUC122 motor stops running after a little use?
If the motor of your Makita Chainsaw stops running after a short period, the battery's charge level might be low. Recharge the battery cartridge, and if that doesn't solve the issue, replace the battery cartridge.
Key safety guidelines for operating the cordless chain saw.
Defines the proper application and purpose of the tool.
Explains kickback causes and how operators can prevent it.
Provides guidance on how to prolong the lifespan of the battery cartridge.
Steps for fitting and removing the battery pack from the tool.
Explains the system that automatically cuts off power to extend battery life.
How to start and stop the tool using the trigger and lock-off button.
Procedures for fitting and removing the saw chain and guide bar.
Guide on how to properly set the tension of the saw chain.
Instructions for installing the optional spike bumper accessory.
Details on the automatic lubrication system for the saw chain.
Guidance on how to sharpen the saw chain correctly.
Instructions for using files and guides for sharpening the chain.
How to clean the groove in the guide bar for optimal oil flow.
Steps to clean the oil filter to ensure proper chain lubrication.
Details on noise levels for different models and recommended protection.
General| Idle speed | - RPM |
|---|---|
| Chain brake | Yes |
| Chain pitch | 1/4 \ |
| Chain speed | 5 m/s |
| Blade length | - mm |
| Product color | Black, Blue |
| Chain bar length | 115 mm |
| Power source | Battery |
| Battery capacity | 5 Ah |
| Uncertainty K | 2 m/s² |
| Sound power level | 92.7 dB |
| Vibration emission | 4.3 m/s² |
| Sound pressure level | 84.6 dB |
Weight and Dimensions| Width | 195 mm |
|---|---|
| Height | 215 mm |
| Length | 422 mm |
| Weight | 2500 g |
To Next Page
