Makita DUC256PG2 User Manual

10 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DUC256
DUC306
DUC356
DUC406
DUC256C
Overall length (without guide bar)
270 mm
Rated voltage
D.C. 36 V
Net weight
*1
4.2 kg
*2
4.6 - 4.8
kg
4.7 - 4.9
kg
4.8 - 5.0
kg
4.8 - 5.1
kg
4.6 - 4.7
kg
Standard guide bar length
250 mm
300 mm
350 mm
400 mm
250 mm
Recommended guide bar
length
with 90PX
250 - 400 mm
-
with 91PX
250 - 400 mm
-
with 25AP
-
250 mm
Applicable saw chain type (refer
to the table below)
90PX
91PX
25AP
Standard sprocket
Number of teeth
6
9
Pitch
3/8″
1/4″
Chain speed
0 - 20 m/s
(0 - 1,200 m/min)
Chain oil tank volume
200 cm
3
• Due to our continuing program of research and development,
the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
*1: Weight, with largest battery cartridge and empty oil tank, and without guide bar and chain, according to EN ISO
11681-2. *2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight
may differ depending on the attachment(s), including the battery cartridge.
Applicable battery cartridge
BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be
available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or fire.
Saw chain, guide bar, and sprocket combination

Makita DUC256PG2 Specifications

General

Brand	Makita
Model	DUC256PG2
Category	Chainsaw
Language	English