To Next PageTo Next PageWhy does my Makita DUR181Z motor stop running after a little use?
If your Makita Trimmer motor stops running after a short period, it could be due to: * Low battery charge. Recharge the battery, and if it's still not effective, replace the battery. * Overheating. Stop using the tool and allow it to cool down.
What to do if Makita DUR181Z has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because: * One end of the nylon cord has broken. Tap the nylon cutting head against the ground while it is rotating to cause the cord to feed. * The drive system is not working correctly. Ask your local authorized service center for repair.
What to do if my Makita DUR181Z Trimmer cutting tool and motor cannot stop?
If the cutting tool and motor of your Makita Trimmer won't stop, it indicates an electric or electronic malfunction. Immediately remove the battery and ask your local authorized service center for repair.
What to do if my Makita DUR181Z motor does not run?
If the motor of your Makita Trimmer doesn't run, there could be several reasons: * The battery cartridge might not be installed. Ensure the battery cartridge is correctly installed. * There might be a battery problem, such as undervoltage. Try recharging the battery. If recharging doesn't work, replace the battery. * The drive system may not be working correctly. In this case, ask your local authorized service center for repair.
Why does my Makita DUR181Z not reach maximum RPM?
Your Makita Trimmer might not reach maximum RPM due to a few reasons: * The battery might be installed improperly. Ensure you install the battery cartridge as described in this manual. * The battery power could be dropping. Try recharging the battery, and if that doesn't help, replace it. * The drive system may not be functioning correctly. Contact your local authorized service center for repair.
What to do if my Makita DUR181Z cutting tool does not rotate?
If the cutting tool of your Makita Trimmer doesn't rotate, stop the machine immediately. This could be due to: * A foreign object, like a branch, jammed between the guard and the nylon cutting head. Remove the foreign object. * The drive system not working correctly. In this case, ask your local authorized service center for repair.
General| Power source | Battery |
|---|---|
| Battery voltage | 18 V |
| Product color | Black, Blue, Metallic |
| Uncertainty K | 1.5 m/s² |
| Plant protector | Yes |
| Rotational speed | 7800 RPM |
| Vibration emission | 2.5 m/s² |
| Sound pressure level | 82 dB |
| Cutting diameter (max) | 260 mm |
| Sound power level guaranteed | 91 dB |
| Sound power level uncertainty | 88.5 dB |
| Sound pressure level uncertainty | 2.5 dB |
Weight and Dimensions| Depth | 257 mm |
|---|---|
| Width | 267 mm |
| Length | 1433 mm |
| Weight | 3100 g |
Specifies the authorized applications for the grass trimmer.
Lists essential safety gear for operating the tool.
Guidelines for safe use of electrical components and batteries.
Procedures for tool upkeep and safety checks.
Critical safety rules for handling and storing battery cartridges.
Techniques for cutting grass effectively.
