Makita DUR184L User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

INSTRUCTION MANUAL

Cordless Grass Trimmer

DUR184L

ENGLISH: Original instructions

Read before use.

Table of Contents

Questions and Answers:

K
kristi91Aug 2, 2025
What to do if my Makita Trimmer motor does not run?
- T
  Tristan MooreAug 2, 2025
  If the motor of your Makita Trimmer doesn't run, there could be several reasons: * The battery cartridge might not be installed. Ensure the battery cartridge is correctly installed. * There might be a battery problem, such as undervoltage. Try recharging the battery. If recharging doesn't work, replace the battery. * The drive system may not be working correctly. In this case, ask your local authorized service center for repair.
C
christian72Aug 6, 2025
What to do if my Makita Trimmer cutting tool does not rotate?
- A
  Anthony MillerAug 6, 2025
  If the cutting tool of your Makita Trimmer doesn't rotate, stop the machine immediately. This could be due to: * A foreign object, like a branch, jammed between the guard and the nylon cutting head. Remove the foreign object. * The drive system not working correctly. In this case, ask your local authorized service center for repair.
N
Nicole KellerAug 11, 2025
What to do if my Makita DUR184L Trimmer cutting tool and motor cannot stop?
- H
  hshawAug 11, 2025
  If the cutting tool and motor of your Makita Trimmer won't stop, it indicates an electric or electronic malfunction. Immediately remove the battery and ask your local authorized service center for repair.
D
Dana ColemanAug 16, 2025
Why does my Makita DUR184L Trimmer not reach maximum RPM?
- K
  Kelly MaddoxAug 16, 2025
  Your Makita Trimmer might not reach maximum RPM due to a few reasons: * The battery might be installed improperly. Ensure you install the battery cartridge as described in this manual. * The battery power could be dropping. Try recharging the battery, and if that doesn't help, replace it. * The drive system may not be functioning correctly. Contact your local authorized service center for repair.
T
Timothy GoodwinAug 21, 2025
Why does my Makita DUR184L Trimmer motor stop running after a little use?
- J
  jennifer09Aug 21, 2025
  If your Makita Trimmer motor stops running after a short period, it could be due to: * Low battery charge. Recharge the battery, and if it's still not effective, replace the battery. * Overheating. Stop using the tool and allow it to cool down.
J
Jeffrey JacksonAug 27, 2025
What to do if Makita DUR184L has abnormal vibration?
- A
  Ashley LawrenceAug 27, 2025
  If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because: * One end of the nylon cord has broken. Tap the nylon cutting head against the ground while it is rotating to cause the cord to feed. * The drive system is not working correctly. Ask your local authorized service center for repair.

Makita DUR184L Specifications

General

Brand	Makita
Model	DUR184L
Category	Trimmer
Language	English

Summary

Specifications

Noise

Details sound pressure and power levels for the tool, including uncertainty.

Vibration

Provides vibration emission values for left and right hands with uncertainty.

Symbols

Explains the meaning of various safety and operational symbols used on the equipment.

Important Safety Instructions

EC Declaration of Conformity

Starting up the tool

Electrical and battery safety

Important safety instructions for battery cartridge

Parts Description

Functional Description

Tool / battery protection system

Explains the automatic cutoff system for tool and battery life extension.

Overload protection

Describes how the tool behaves when overloaded by debris or entanglement.

Overheat protection for tool or battery

Details the automatic shutdown and cooling procedure when the tool overheats.

Overdischarge protection

Explains the indicator and shutdown when the battery power is nearly depleted.

Indicating the remaining battery capacity

Power switch action

Speed adjusting

Reverse button for debris removal

Adjusting the shaft length

Nylon cutting head

Assembly

Installing the grip

Installing the guard

Installing the wire guard

Operation

Installing nylon cutting head

Instructions for attaching the optional nylon cutting head accessory.

Correct handling of tool

Guidance on proper grip, positioning, and control to prevent kickback and injury.

Maintenance

Attachment of shoulder harness

Steps for connecting and adjusting the shoulder harness for comfortable use.

Replacing the nylon cord

Procedure for refilling or replacing the cutting line in the trimmer head.

Trouble Shooting

Optional Accessories

Related product manuals

Preview: Makita DUR181

Preview: Makita DUR189

Preview: Makita DUR189Z

Preview: Makita DUR188L

Preview: Makita DUR182U

Preview: Makita DUR187L

Preview: Makita DUR181Z

Preview: Makita DUR181SY

Makita DUR181SY

Preview: Makita DUR181RT

Makita DUR181RT

Preview: Makita DUR188UZ

Makita DUR188UZ

Preview: Makita DUR181SF

Makita DUR181SF