Why does my Makita DUR189 motor not run?
The motor of your Makita Trimmer might not be running due to several reasons: the battery cartridge might not be installed properly (install it correctly), the battery might be under voltage (recharge or replace it), or the drive system may not be working correctly.
What to do if my Makita DUR189 motor stops running after a little use?
If your Makita Trimmer's motor stops after a short period, it could be due to a low battery charge (recharge or replace the battery). Another possibility is overheating, in which case you should stop using the tool and allow it to cool down.
General| Voltage | 18V |
|---|---|
| Power Source | Battery |
| Cutting Width | 300 mm |
| Spindle Size | M8 x 1.25 LH |
| Line Diameter | 2.0 mm |
| Cutting Diameter | 30 cm |
| No Load Speed | 6000 RPM |
Detailed specifications including speed, length, weight, and dimensions.
Presents the noise pressure level and vibration emission data for the tool.
Lists compatible battery cartridges and chargers for the cordless grass trimmer.
Explains the meaning of various symbols used throughout the instruction manual.
Comprehensive safety guidelines and warnings for operating the tool safely.
Defines the tool's intended purpose and lists the necessary safety gear.
Explains the automatic shut-off system to protect the tool and battery.
Details protection mechanisms against common operational issues.
How to check the battery's remaining charge level.
Essential guidelines for safe and effective handling of the tool during use.
How to attach and adjust the shoulder harness for user comfort and control.
To Next Page
