Makita EA3501S Instruction Manual

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Instruction Manual

Original Instruction Manual

Important:

Read this instruction manual carefully before putting the chain saw into operation and strictly observe the

safety regulations!

Keep this instruction manual!

EA3500S

EA3501S

EA3502S

EA3503S

Table of Contents

Other manuals for Makita EA3501S

Operator's And Safety Manual44 pages

Original Instruction Manual220 pages

Technical Information16 pages

Questions and Answers:

A
Ashley ParsonsAug 29, 2025
What to do if my Makita EA3501S Chainsaw starts, but dies immediately?
- M
  michael31Aug 30, 2025
  If your Makita Chainsaw starts but immediately dies, the idling might be wrongly adjusted, or the suction head or carburetor could be dirty. Adjust the idling and clean the suction head and carburetor. Also, the tank venting might be defective, the fuel line interrupted, the cable defective, or the combination switch defective. Check for proper tank venting and inspect the fuel line and cables.
S
Shane WilliamsAug 29, 2025
What to do if my Makita EA3501S has insufficient power?
- B
  barrychristinaAug 29, 2025
  If your Makita Chainsaw has insufficient power, the air filter might be dirty, the carburetor might be wrongly adjusted, the muffler could be clogged, the exhaust channel in the cylinder might be clogged, or the spark arrester screen could be clogged. Clean or replace the air filter, adjust the carburetor, and clear the muffler and exhaust channels.
V
Veronica MurrayAug 28, 2025
How to fix insufficient power in Makita Saw?
- J
  Johnny MooreAug 28, 2025
  If your Makita Saw has insufficient power, the cause might be a dirty air filter, incorrect carburetor adjustment, a clogged muffler, a clogged exhaust channel in the cylinder, or a clogged spark arrester screen. Clean or replace the air filter and muffler.
L
lwatkinsAug 27, 2025
Why my Makita EA3501S engine does not start?
- R
  roytiffanyAug 27, 2025
  If your Makita Chainsaw engine is not starting, begin by checking the ignition spark. Also inspect the wiring, and replace the spark plug or cap if defective. Ensure proper spark plug sealing. Adjust the combination switch and clean the carburetor if the combination switch is in Choke position, or if the carburetor is defective, or the suction head is dirty, or the fuel line is bent or interrupted. Finally, inspect the starter and engine parts, and replace defective components if the cylinder base packing ring or radial shaft packings are defective, or if the cylinder or piston rings are defective.
T
Tanya ContrerasAug 26, 2025
Why won't my Makita EA3501S engine start?
- B
  brandon70Aug 26, 2025
  If your Makita Chainsaw engine is not starting, several factors could be at play. There may be a malfunction in the fuel supply, compression, or mechanical systems. Check and repair the ignition system, fuel supply, or starter as needed. Also, ensure the STOP switch is in the correct position and check the wiring, spark plug cap, and spark plug. Inspect and adjust the combination switch; clean or replace the carburetor and suction head; and check the fuel line. Replace any defective parts in the cylinder or piston. Finally, inspect and replace the starter spring or any broken parts inside the engine.
P
Patricia CalderonAug 25, 2025
Why is my Makita Chainsaw engine not starting?
- A
  Austin AlexanderAug 26, 2025
  There could be several reasons why your Makita Chainsaw engine isn't starting. It could be due to a malfunction in the fuel supply or compression system, or a mechanical issue. Check the ignition spark and ensure the fuel tank is full. Also, inspect the STOP switch and wiring for any faults. Other potential causes include a defective carburetor, a dirty suction head, a bent or interrupted fuel line, defective cylinder base packing ring or piston rings, or broken parts in the starter or engine. Examine the cylinder base packing and piston rings. Inspect the starter spring and the engine for broken parts.

Makita EA3501S Specifications

General

Brand	Makita
Model	EA3501S
Category	Chainsaw
Language	English

Related product manuals

Preview: Makita EA3501F

Preview: Makita EA3502S

Preview: Makita EA3500S

Preview: Makita EA3500F

Preview: Makita EA3500SRDB

Makita EA3500SRDB

Preview: Makita EA3201S

Preview: Makita EA3202S

Preview: Makita EA3200S

Preview: Makita EA3203S

Preview: Makita EA3201S35B

Makita EA3201S35B

Preview: Makita EA7900P

Preview: Makita EA4300F