To Next Page
J
Jamie LunaAug 25, 2025
Why won't my Makita EA3502S engine start?
- MMr. Christopher DayAug 26, 2025
If your Makita Chainsaw engine is not starting, several factors could be at play. There may be a malfunction in the fuel supply, compression, or mechanical systems. Check and repair the ignition system, fuel supply, or starter as needed. Also, ensure the STOP switch is in the correct position and check the wiring, spark plug cap, and spark plug. Inspect and adjust the combination switch; clean or replace the carburetor and suction head; and check the fuel line. Replace any defective parts in the cylinder or piston. Finally, inspect and replace the starter spring or any broken parts inside the engine.
General
