38
EU Conformity Declaration
The undersigned, Tomoyasu Kato, as authorized by MAKITA Corporation, declare that the MAKITA machines,
Type: 125 EU prototype test certiÞ cate No.
Chain saw EA3500S, 3501S, 3502S, 3503S 4811008.12006
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502, Japan, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG.
EU EMC Directive 2004/108/EG.
Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 11681-1, EN ISO
14982, CISPR 12.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise level (L
wa
) is 111,8 dB(A). The
guaranteed noise level (L
d
) is 113 dB(A).
The EU Type-Examination CertiÞ cate was performed by: DEKRA Testing and CertiÞ cation GmbH (2140), Enderstraße 92 b, D-01277
Dresden.
The technical documentation is on Þ le at MAKITA International Europe Ltd, Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, England.
Anjo, 20.6.2012
For MAKITA Corporation
Tomoyasu Kato
Managing Director
To Next Page
Loading...
