EasyManuals Logo

Makita EA5000P User Manual

Makita EA5000P
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
(5) Notwithstanding the provisions of Subsection (4) above, warranty services or repairs must be provided at all
manufacturer distribution centers that are franchised to service the subject engines.
(6) The owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in
fact defective, provided that such diagnostic work is performed at a warranty station.
(7) The manufacturer is liable for damages to other engine components proximately caused by a failure under
warranty of any warranted part.
(8) Throughout the emissions warranty period dened in Subsection (b)(2), the manufacturer must maintain a
supply of warranted parts sufcient to meet the expected demand for such parts.
(9) Any replacement part may be used in the performance of any warranty maintenance or repairs and must be
provided without charge to the owner. Such use will not reduce the warranty obligations of the manufacturer.
(10) Add-on or modied parts that are not exempted by the Air Resources Board may not be used. The use of any
non-exempted add-on or modied parts will be grounds for disallowing a warranty claim. The manufacturer will not
be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modied part.
(11) The manufacturer issuing the warranty shall provide any documents that describe that manufacturer's war
-
ranty procedures or policies within ve working days of request by the Air Resources Board.
(d) Emission Warranty Parts List
(1) Fuel Metering System
(I) Carburetor
(II) Fuel lter, if applicable
(III) Choke (Cold start enrichment system)
(IV) Fuel Tank
(2)
Air Induction System
(I) Intake manifold.
(II) Air lter.
(3)
Ignition System
(I) Spark Plug
(II) Ignition coil
(III) Flywheel Magneto
(4)
Exhaust Gas Recirculation (EGR) System (if applicable)
(I) EGR chamber
(5)
Catalyst, if applicable
(I) Catalytic converter, if applicable
(6)
Miscellaneous Items Used in Above Systems
(I) Hoses, belts, connectors, sealing gaskets, clamps, fasteners
(II) Fuel cap
MAKITA will furnish with each new engine written instructions for the maintenance and use of the engine by the
owner.

Table of Contents

Other manuals for Makita EA5000P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita EA5000P and is the answer not in the manual?

Makita EA5000P Specifications

General IconGeneral
BrandMakita
ModelEA5000P
CategoryChainsaw
LanguageEnglish

Related product manuals