Makita EA5000P - Page 40

40
Extract from the spare parts list
Use only original MAKITA parts. For repairs and
replacement of other parts, see your MAKITA service center.
Pos. MAKITA-No. Qty. Denomination
1 445 040 641 1 Sprocket nose bar .325", 16"
445 045 641 1
Sprocket nose bar .325", 18"
2 523 082 666 1
Saw chain .325" for 16"
523 082 672 1
Saw chain .325" for 18"
1 445 045 631 1
Sprocket nose bar .325", 18"
2 528 086 672 1 Saw chain .325" for 18"
1 443 045 661 1
Sprocket nose bar 3/8", 18"
2 513 496 664 1 Saw chain 3/8" for 18"
3 952 010 640 1 Chain protector for 16"
952 020 650 1 Chain protector for 18"
4 181 213 601 1
Sprocket guard, cpl.
5 923 208 004 2
Hexagonal nut M8
6 941 719 131 1 Universal wrench SW 19/13
7 940 827 000 1
Offset screwdriver
8 944 340 001 1
Carburetor screwdriver
9 010 114 010 1
Fuel lter
10 181 114 202 1
Fuel tank cap, cpl.
11 963 229 036 1 O-Ring 29,3x3,6 mm
12 170 114 100 1
Oil tank cap, cpl.
13 963 225 030 1
O-Ring 25x3 mm
14 965 603 021 1
Spark plug
15 181 164 020 1
Starter cable 3,5x1100 mm
16 181 173 180 1
Air lter (eece)
17 181 163 050 1 Return spring pack, complete
18 181 163 080 1 Spring
19 181 163 090 1 Driver
20 026 224 010 1
3/8” sprocket, 7-tooth
181 224 040 1
Sprocket .325“, 7-tooth
21 181 223 062 1 Clutch drum
22 927 408 000 1 Circlip
24 181 174 470 1 Spark collector, cpl.
25 181 250 030 1 Spike bar
26 181 250 020 1 Spike bar
Accessories (not delivered with the chain saw)
28 953 100 090 1 Chain gauge
29 953 004 010 1 File handle
30 953 003 100 1 Round le, dia. 11/64", (4,5 mm)
30 953 003 070 1 Round le, dia. 3/16", (4,8 mm)
30 953 003 040 1 Round le, dia. 7/32", (5,5 mm)
31 953 003 060 1 Flat le
32 953 030 020 1 File holder 11/64”
32 953 009 000 1 File holder
7/32”
32 953 030 030 1
File holder 3/16”
33 944 500 795 1 Cylinder ribs cleaner
16 181 173 240 1 Air lter (nylon)
- 949 000 035 1 Combined can
(for 5l fuel, 2.5l chain oil)
EA5000P