Makita EA5600F User Manual

Operator’s and Safety Manual
for Gasoline Chain Saws
WARNING!
Read and understand this Manual. Always follow safety precautions in the Operator’s and Safety Manual.
Improper use can cause serious injury! Preserve this Manual carefully!
WARNING!
FUELS WITH MORE THAN 10% ETHANOL ARE NOT APPROVED FOR USE IN MAKITA 2-STROKE ENGINES!
Use of alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting MAKITA
requirements are not approved for use in MAKITA 2-stroke gasoline engines!
USE OF ALTERNATIVE FUELS CAN CAUSE THE FOLLOWING PROBLEMS:
Poor engine performance, loss of power, overheating, fuel vapor lock, improper clutch engagement, premature
deterioration of fuel lines, premature deterioration of gaskets, premature deterioration of carburetors.
USING ALTERNATIVE FUELS AND/OR 2-STROKE OILS NOT ACCORDING TO JASO FD OR ISO-L-EGD IN
MAKITA 2-STROKE ENGINES WILL VOID YOUR ENGINE WARRANTY!
EA5600F

Makita EA5600F Specifications

General

Brand	Makita
Model	EA5600F
Category	Chainsaw
Language	English

Summary

Chain Saw Safety Precautions

Kickback Safety Precautions

Detailed instructions to prevent and manage dangerous kickback incidents.

Additional Operator Safety

Additional Safety Precautions

Extra safety measures for operators, covering handling, environment, and personal protection.

General Safety and Operator Information

General Safety Precautions

Operator Requirements

Proper Clothing and Saw Overview

Proper Clothing

Chain Saw Operating Instructions

Fueling and Starting the Engine

Instructions for safe fueling and starting the engine.

Cutting Techniques and Reactive Forces

Cutting Instructions

Proper techniques for holding and operating the saw during cutting.

Reactive Forces Explained

Explanation of dangerous forces like kickback, pushback, and pull-in.

Kickback Prevention

To Avoid Kickback

Preventive measures and best practices to avoid kickback situations.

Advanced Cutting Techniques

Pushback and Pull-in Avoidance

Felling Trees Safely

Felling Instructions

Step-by-step guide for felling trees, including planning and execution.

Specialized Cutting Methods

Sectioning and Plunge-Cut Methods

Bucking and Limbing Logs

Bucking and Limbing Techniques

Maintenance and Repair Overview

Maintenance and Storage

Initial Setup and Assembly

Mounting the Guide Bar and Saw Chain

Chain Tensioning Procedure

Tightening the Saw Chain

Chain Brake and Tension Checks

Chain Tension Checks

Chain Brake Functionality

Explanation of the chain brake mechanism and its function during kickback.

Fuel and Oil Information

Fuel Mixture Preparation

Details on preparing the correct gasoline and two-stroke oil mixture ratio.

Refueling and Chain Lubrication

Refueling Process

Safe procedures for refueling the chain saw and lubricating the chain.

Chain Lubrication Adjustments

Checking and Adjusting Chain Lubrication

Engine Starting and Stopping Procedures

Starting and Stopping the Engine

Detailed instructions for starting, cold/warm start, and stopping the engine.

Carburetor Idle Speed Adjustment

Adjusting the Carburetor

Saw Chain Sharpening

Proper Sharpening Technique

Detailed guide on how to properly sharpen the saw chain for optimal cutting.

Chain Sharpening Tools and Files

Files and How to Work With Them

Saw Chain Replacement

Replacing the Saw Chain

Air Filter Cleaning

Cleaning the Air Filter

Spark Plug and Ignition System

Spark Plug, Ignition, and Muffler Checks

Periodic Maintenance Schedule

Instructions for Periodic Maintenance

Troubleshooting Common Issues

Trouble shooting

Common malfunctions, their causes, and solutions for the chain saw.