Makita EB5300TH User Manual (English)

Other manuals for Makita EB5300TH

Repair Manual71 pages

Original Instruction Manual84 pages

Questions and Answers:

D
David ParsonsAug 22, 2025
Why won't my Makita EB5300TH Blower engine start?
- J
  Jason Smith DDSAug 22, 2025
  If your Makita Blower engine won't start, several factors could be the cause. First, ensure you've primed the pump by pushing it 7 to 10 times. Check the fuel level and replenish if low. Examine the fuel filter for clogs, cleaning or replacing it as necessary. Also, make sure the spark plug is clean, properly gapped, and securely attached. If the fuel is old, replace it, as deteriorated fuel can make starting difficult (recommended replacement is every 1 month). If there's excessive fuel suction, set the throttle lever from medium to high speed and pull the starter handle. If it still won't start, remove the spark plug, dry the electrode, reassemble, and try again. Other possible causes include a bent fuel tube (straighten it) or a detached plug cap (reattach securely).
J
Jason ReyesSep 2, 2025
What to do if my Makita EB5300TH has a choke lever set to “CLOSE” after warm-up?
- C
  clayton86Sep 2, 2025
  Set the choke lever to “OPEN”.
S
sean34Sep 1, 2025
What to do if my Makita EB5300TH Blower has a detached plug cap?
- C
  Cynthia IbarraSep 1, 2025
  Attach the plug cap securely.
J
johnnyjordanAug 31, 2025
What to do if my Makita EB5300TH has a contaminated spark plug?
- F
  fieldslucasAug 31, 2025
  Clean the spark plug.
B
Brian CollinsAug 30, 2025
What to do if my Makita Blower has deteriorated fuel?
- D
  Daniel GuerreroAug 30, 2025
  Replace the old fuel with new fuel. It's recommended to replace the fuel every month.
J
Jennifer JohnsonAug 28, 2025
What to do if my Makita EB5300TH Blower has a clogged fuel filter?
- C
  cjacobsonAug 28, 2025
  Clean the fuel filter or replace it with a new one.
D
Donald WilsonAug 27, 2025
What to do if my Makita EB5300TH Blower engine stops soon and the speed doesn't increase?
- T
  Teresa BakerAug 27, 2025
  This issue may arise due to insufficient warm-up. Perform a warm-up operation to resolve this.
G
George BarnesAug 27, 2025
What to do if my Makita EB5300TH engine stops soon after starting?
- T
  Tracy SimmonsAug 27, 2025
  If your Makita Blower engine stops soon after starting or the engine speed does not increase, consider the following: * **Warm-up:** Perform the warm-up operation. * **Choke lever:** Ensure the choke lever is set to “OPEN” after the engine warms up. * **Fuel filter:** Clean the fuel filter if it’s clogged. * **Air cleaner:** Clean the air filter if it's contaminated or clogged. * **Control cable:** Securely attach any detached control cables.
T
tharrisAug 25, 2025
How to fix a Makita EB5300TH throttle that does not return to idling speed?
- J
  jonesjesusAug 26, 2025
  If the throttle on your Makita Blower doesn't return to idling speed, it may be caused by an improper throttle valve position. Reposition the control cable.
A
Ashley BushAug 25, 2025
How to fix a Makita Blower that won't start?
- J
  Jay HermanAug 25, 2025
  If your Makita Blower engine won't start, several factors could be at play. First, ensure you've primed the pump by pushing it 7 to 10 times. A low pulling speed of the starter rope can also prevent starting, so pull strongly. Check for a lack of fuel and replenish if needed. A clogged fuel filter can be cleaned or replaced. Bent fuel tubes should be straightened. If the fuel is old (more than a month), replace it. For excessive fuel suction, adjust the throttle lever from medium to high speed and try starting. Also, ensure the plug cap is securely attached and the spark plug is clean and properly gapped, replacing it if necessary. If none of these steps work, there may be an issue with the carburetor, starter knob, or internal engine parts, requiring professional inspection.

Makita EB5300TH Specifications

General

Type	Cordless backpack blower
Power	2500 W
Airflow	900 m³/h
Airspeed	352.8 km/h
Noise level	96 dB
Suction mode	No
Product color	Black, Blue
Shoulder strap	Yes
Working technology	Four-stroke petrol
Power source	Gasoline
Vibration emission	2.2 m/s²