To Next PageTo Next PageWhy Makita Saw engine does not stop?
If your Makita Saw engine won't stop, check for a detached connector (attach securely). For abnormal electric system it is recommended to make request for inspection and maintenance.
What to do if cutting disc does not stop immediately on Makita Saw?
If the cutting disc on your Makita Saw doesn't stop immediately, it may be due to high idling rotation (adjust). For detached throttle linkage or abnormal drive system it is recommended to make request for inspection and maintenance.
Why is my Makita Saw main unit vibrating abnormally?
Abnormal vibration in your Makita Saw could stem from a broken, bent, or worn cutting disc (replace cutter blade) or a loosened cutting disc-tightening bolt (tighten securely). For abnormal drive system it is recommended to make request for inspection and maintenance.
What to do if my Makita Saw engine stops soon after starting?
If your Makita Saw engine stops soon after starting, it could be due to insufficient warm-up (perform warm-up operation). Another reason might be that the choke lever is set to the wrong position (set to “ON ”). A clogged fuel filter (clean it) or a contaminated air cleaner (clean it) could also be the cause. For abnormal carburetor or drive system it is recommended to make request for inspection and maintenance.
How to fix a Makita EK7650H when the cutting disc does not rotate?
If the cutting disc of your Makita Cutter does not rotate, ensure the cutting disc-tightening bolt is securely tightened. If the issue persists, the drive system might be abnormal, requiring professional inspection and maintenance.
Why cutting disc does not stop immediately on my Makita Saw?
If the cutting disc on your Makita Saw doesn't stop immediately, stop the engine immediately. This may be due to high idling rotation, which requires adjustment. If that's not the case, it could be due to a detached throttle linkage or an abnormal drive system, both of which require professional inspection and maintenance.
What to do if the cutting disc does not rotate on my Makita Saw?
If the cutting disc on your Makita Saw isn't rotating, stop the engine immediately. This could be due to a loosened cutting disc-tightening bolt; ensure it is tightened securely. If the bolt is secure and the disc still doesn't rotate, the drive system may be abnormal, requiring professional inspection and maintenance.
What to do if the cutting disc of my Makita EK7650H Cutter does not rotate?
If the cutting disc of your Makita Cutter does not rotate, check if the cutting disc-tightening bolt is loosened and tighten it securely.
What to do if Makita Saw engine stops soon or engine speed does not increase?
If your Makita Saw engine stops shortly after starting, or the engine speed doesn't increase, it might be due to several reasons. Ensure you perform a warm-up operation. Check that the choke lever is set to “ON ” if the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues, so clean them. If these steps don't resolve the problem, the carburetor or drive system may be abnormal, requiring professional inspection and maintenance.
What to do if cutting disc on my Makita EK7650H does not stop immediately?
General| Engine Type | 4-stroke |
|---|---|
| Displacement | 75.6 cc |
| Fuel Tank Capacity | 1.1 L |
| Blade Diameter | 350 mm |
| Wheel Diameter | 350 mm |
| Cutting Depth | 125 mm |
| Max Cutting Depth | 125 mm |
| Arbor Size | 25.4 mm |
Recommended safety gear including helmet, goggles, hearing, and gloves for operator protection.
Safe procedures for handling, storing, and refuelling the power cutter with gasoline.
Safety measures before starting, including area checks, bystanders, and machine inspection.
Guidelines for safe use, mounting, and handling of cutting discs to prevent accidents.
Understanding and avoiding kickback and lock-in hazards during operation for user safety.
Step-by-step guide on correctly mounting the cutting disc onto the spindle.
Essential checks and replenishing of engine oil before starting the power cutter.
Detailed instructions for cold and warm starting the power cutter's engine.
