To Next PageTo Next PageWhy does my Makita EK7651H engine stop soon after starting?
If your Makita Cutter engine stops soon after starting or the engine speed does not increase, it could be due to insufficient warm-up (perform warm-up operation), the choke lever is set to “ ” although engine is warmed up (set to “ON ”), a clogged fuel filter (clean it), or a contaminated or clogged air cleaner (clean it).
What to do if the cutting disc does not stop immediately on my Makita Cutter?
If the cutting disc of your Makita Cutter does not stop immediately, it may be due to high idling rotation (adjust it).
What to do if my Makita Cutter engine stops soon or the speed doesn't increase?
If your Makita Cutter engine stops soon after starting or the engine speed doesn't increase, it could be due to insufficient warm-up; perform a warm-up operation. Also, check that the choke lever is set to “ON ” if the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues; clean these components. For carburetor or drive system abnormalities, request an inspection and maintenance.
What to do if Makita Saw engine stops soon or engine speed does not increase?
If your Makita Saw engine stops shortly after starting, or the engine speed doesn't increase, it might be due to several reasons. Ensure you perform a warm-up operation. Check that the choke lever is set to “ON ” if the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues, so clean them. If these steps don't resolve the problem, the carburetor or drive system may be abnormal, requiring professional inspection and maintenance.
What to do if Makita Saw has no fuel?
If your Makita Saw engine does not start because of lack of fuel, feed fuel.
Why Makita Saw engine does not stop?
If your Makita Saw engine won't stop, check for a detached connector (attach securely). For abnormal electric system it is recommended to make request for inspection and maintenance.
What to do if cutting disc does not stop immediately on Makita Saw?
If the cutting disc on your Makita Saw doesn't stop immediately, it may be due to high idling rotation (adjust). For detached throttle linkage or abnormal drive system it is recommended to make request for inspection and maintenance.
Why is my Makita Saw main unit vibrating abnormally?
Abnormal vibration in your Makita Saw could stem from a broken, bent, or worn cutting disc (replace cutter blade) or a loosened cutting disc-tightening bolt (tighten securely). For abnormal drive system it is recommended to make request for inspection and maintenance.
What to do if my Makita Saw engine stops soon after starting?
If your Makita Saw engine stops soon after starting, it could be due to insufficient warm-up (perform warm-up operation). Another reason might be that the choke lever is set to the wrong position (set to “ON ”). A clogged fuel filter (clean it) or a contaminated air cleaner (clean it) could also be the cause. For abnormal carburetor or drive system it is recommended to make request for inspection and maintenance.
What causes the cutting disc on my Makita Saw not to rotate?
If the cutting disc on your Makita Saw does not rotate, make sure the cutting disc-tightening bolt is securely tightened. If the issue persists, there may be an abnormal drive system, which requires professional inspection and maintenance.
General| Depth | 780 mm |
|---|---|
| Width | 310 mm |
| Height | 455 mm |
| Weight | 12900 g |
| Product type | Petrol abrasive saw |
| Product color | Black, Blue |
| Sound power level | 104.6 dB |
| Cutting speed | 80 m/s |
| Blade diameter | 350 mm |
| Idle speed (max) | 4300 RPM |
| Cutting depth (90º) | 122 mm |
| Sound pressure level | 92.7 dB |
| Sound level uncertainty | 2.5 dB |
| Engine type | 4-stroke engine |
| Engine power | 4.1 hp |
| Uncertainty K | 2 m/s² |
| Fuel tank capacity | 1.1 L |
| Vibration emission | 2.7 m/s² |
| Engine displacement | 75.6 cm³ |
| Arbor diameter | 20 mm |
| Idle speed (min) | 9100 RPM |
| Anti-vibration system | Yes |
| Engine number of strokes | 4 |
| Air filtration stages quantity | 5 |
| Motor power | 4.5 hp |
| Power source | Gasoline |
| Motor rated power | 3.3 kW |
Key symbols and their meanings for understanding the manual.
Operator must read manual for safe operation and wear essential protective gear.
Safe refuelling procedures and pre-operation checks are critical.
Guidelines to prevent kickback, lock-in, and ensure safe working behavior.
Step-by-step guide for securely mounting the cutting disc.
Step-by-step guide for starting the engine in cold and warm conditions.
