To Next Page
S
Shawn MooreAug 8, 2025
Why doesn't the cutting disc start turning on my Makita EK8100?
- TTaylor SpencerAug 8, 2025
A damaged clutch can cause the cutting disc of your Makita Cutter not to start turning.
Why doesn't the cutting disc start turning on my Makita EK8100?
A damaged clutch can cause the cutting disc of your Makita Cutter not to start turning.
Why won't my Makita Cutter engine start?
Several issues can cause your Makita Cutter's engine to fail to start or start with difficulty. These include malfunctions in the fuel supply or compression systems, mechanical issues, the STOP switch being on, wiring faults or short circuits, a defective plug cap or spark plug, incorrect choke position, a defective carburetor, a dirty suction head, a bent or interrupted fuel line, a defective cylinder base packing ring or radial shaft packings, defective cylinder or piston rings, a spark plug that doesn't seal, a broken starter spring, or broken parts inside the engine.
Why does my Makita EK8100 Cutter have insufficient power?
If your Makita Cutter has insufficient power, it could be due to a dirty air filter, incorrect carburetor adjustment, a clogged muffler, a clogged exhaust channel in the cylinder, or a clogged spark arrester screen.
Why is my Makita Cutter difficult to start when warm?
If you are experiencing warm start difficulties with your Makita Cutter, it may be due to wrong carburetor adjustment.
Why is the cutting disc running in idle on my Makita EK8100 Cutter?
If the cutting disc of your Makita Cutter runs in idle, it could be due to an incorrect idle speed, a blocked clutch, insufficient belt tension, or a worn V-belt.
Defines the correct and incorrect usage of the Power Cut saw.
Provides essential safety rules and user responsibilities for safe operation.
Details mandatory safety gear required for operating the Power Cut.
Guidelines for handling and storing fuel, and the refuelling process.
Steps and precautions for safely starting the Power Cut for the first time.
Information on disc types, usage, and safety for cutting discs.
Crucial checks and procedures before operating the cutting disc.
Safe methods for starting the Power Cut, including testing new discs.
Explains kickback and lock-in risks and how to prevent them.
Guidelines for correct posture, positioning, and general working practices.
Specific handling and usage instructions for synthetic resin cutting discs.
Detailed instructions and safety tips for cutting metal materials.
Guidelines for cutting masonry and concrete, including wet cutting.
Instructions for performing wet cutting operations for dust suppression and cooling.
Procedures for safely transporting and storing the Power Cut and accessories.
General maintenance procedures and recommendations for the Power Cut.
Information on what to do in case of an accident and how to call for help.
Guidelines for proper disposal of parts and the Power Cut.
Comprehensive technical specifications for the different Power Cut models.
Identifies and labels all parts of the Power Cut with numerical references.
Step-by-step guide on how to safely mount the cutting disc.
Instructions for checking and adjusting the V-belt tension.
Information on the correct type of fuel and oil mixture required for the engine.
Advice on storing fuel safely and its limited shelf life.
Warnings and advice regarding skin and eye contact with mineral oil products.
Step-by-step instructions for safely refuelling the Power Cut.
Detailed instructions on how to start the engine using the decompression valve.
Procedure for starting the engine from a cold state.
Procedure for starting the engine when it is already warm.
Instructions on how to safely stop the engine.
Steps for adjusting the carburetor and setting the idling speed.
Detailed instructions for replacing the V-belt of the Power Cut.
Procedures for cleaning the protective hood to ensure free rotation of the cutting disc.
Steps for cleaning or replacing the air filter for optimal engine performance.
Instructions for cleaning and maintaining the pre-filter element.
Guidance on cleaning the inner filter element for proper air intake.
Procedures for cleaning or replacing the paper air filter insert.
Steps for replacing the spark plug to ensure proper ignition.
How to check for a proper ignition spark.
Instructions for replacing the suction head to maintain fuel flow.
Detailed guide on how to replace the starter cable.
Instructions for replacing the return spring in the starter housing.
Explains the two positions for the cutting attachment and their benefits.
Step-by-step instructions for changing the cutting attachment position.
Guide for cleaning or replacing the spark arrester screen.
Information about the benefits and uses of MAKITA diamond cutting discs.
Details on the guide trolley for improved cutting accuracy and ease of use.
Description of the water tank accessory for dust suppression and disc cooling.
Information on the water system accessory for wet cutting applications.
A schedule outlining regular maintenance tasks and their frequency.
Information on service centers, genuine spare parts, and product guarantee.
Details regarding the MAKITA product guarantee and exclusions.
A guide to diagnose and resolve common malfunctions and issues.
A visual diagram identifying various spare parts by number.
A comprehensive list of available spare parts with their part numbers.
Official declaration of conformity with EU directives.
General
