S
Seth DavisAug 15, 2025
Why won't my Makita EM4251 Trimmer engine start?
- AAndrew TaylorAug 15, 2025
If your Makita Trimmer engine won't start, make sure you are feeding it fuel. A lack of fuel can prevent the engine from starting.
To Next PageTo Next PageWhy won't my Makita EM4251 Trimmer engine start?
If your Makita Trimmer engine won't start, make sure you are feeding it fuel. A lack of fuel can prevent the engine from starting.
Why does my Makita EM4251 Trimmer engine stop soon after starting?
If the Makita Trimmer engine stops soon after starting or the engine speed doesn't increase, it might not be sufficiently warmed up. Perform the warm-up operation to resolve this.
What to do if the cutter blade on my Makita Trimmer does not rotate?
If your Makita Trimmer cutter blade does not rotate, the cutter blade-tightening nut might be loose. Make sure to tighten it securely.
What to do if my Makita Trimmer engine does not start and I suspect a clogged fuel filter?
If your Makita Trimmer engine doesn't start, the fuel filter might be clogged. Clean the fuel filter to resolve this issue.
What to do if my Makita EM4251 engine does not stop?
If the engine of your Makita Trimmer does not stop, check for a detached connector and attach it securely.
Why is my Makita EM4251 vibrating abnormally?
If your Makita Trimmer is vibrating abnormally, the cutter blade might be broken, bent, or worn. Replace the cutter blade to stop the vibration.
What to do if the fuel tube is bent on my Makita EM4251 and it won't start?
If your Makita Trimmer engine won't start, the fuel tube might be bent. Straighten the fuel tube to allow fuel to flow correctly.
Why doesn't the cutter blade on my Makita EM4251 stop immediately?
If the cutter blade on your Makita Trimmer doesn't stop immediately, the idling rotation might be too high. You should adjust it.
Explains the meaning of the "Read Instruction Manual" symbol.
Symbol indicating the need for careful attention and handling.
Symbol indicating prohibited actions or usage.
Symbol indicating a required safety distance from hazards.
Symbol warning of the danger of flying debris.
Symbol indicating prohibition of smoking.
Symbol indicating prohibition of open flames.
Symbol indicating the mandatory use of protective gloves.
Symbol warning about the risk of kickback.
Symbol indicating to keep the working area clear.
Symbol for mandatory eye and ear protection for grass trimmers.
Symbol indicating not to use metal blades with grass trimmers.
Symbol indicating the maximum allowed speed for tools.
Symbol representing fuel (gasoline) for the engine.
Symbol indicating manual engine start procedure.
Symbol for the emergency stop function.
Symbol for first aid provision.
Symbol indicating the ON or START function.
Symbol indicating the OFF or STOP function.
Provides general safety guidelines for operating the brush cutter/grass trimmer.
Specifies the proper applications for the brush cutter/grass trimmer.
Details essential personal protective gear for safe operation.
Instructions on how to safely start the brush cutter.
Explains the phenomenon of kickback and its causes.
Provides methods to prevent dangerous kickback incidents.
Discusses the appropriate cutting tools for different tasks.
Outlines essential maintenance procedures for the equipment.
Instructions for mounting the handle on U-handle models.
Instructions for mounting the handle on loop-handle models.
Specific instructions for mounting the protector on EM4250.
General instructions for mounting the protector on both models.
Steps for mounting cutter blades or nylon cutting heads on both models.
Detailed procedure for installing the nylon cutting head.
Procedures for checking and refilling engine oil before use.
Specific guidance on using and cleaning the oil gauge.
How to adjust the shoulder strap for proper operation.
Instructions for detaching the machine in emergencies.
Steps and precautions for starting the engine.
Procedure for starting the engine from a cold state.
Starting procedure for U-handle and loop-handle machines.
Important warnings and advice for operating the machine safely.
Procedure for starting the engine after it has been warmed up.
Procedure for safely stopping the engine.
How to effectively operate the nylon cutting head.
Step-by-step guide for replacing the nylon cutting cord.
Routine checks and maintenance tasks to be performed daily.
Procedures and intervals for replacing engine oil.
Important notes and regulations regarding engine oil disposal and maintenance.
Instructions for cleaning the air filter element.
Steps for inspecting, cleaning, and adjusting the spark plug.
How and when to supply grease to the gear case.
Procedure for cleaning or replacing the fuel filter.
Guidance on replacing the fuel pipe annually.
Instructions for checking and tightening various fasteners.
General advice on keeping the engine and parts clean.
Notes on replacing gaskets and packings during reassembly.
A table listing common faults, observations, and causes.
Common causes and remedies when the engine fails to start.
Troubleshooting steps for when the engine stops unexpectedly.
Solutions for issues where engine speed is insufficient.
Diagnosing and fixing problems with the cutter blade not rotating.
Actions to take when the main unit vibrates abnormally.
Steps to take if the cutter blade fails to stop promptly.
Remedies for when the engine fails to stop.
General
